Some of the more enjoyable surfaces (for example, the grain of a fine mahogany table top or a Japanese sword) have an interplay between pattern and texture which, though two-dimensional, suggests the unseen internal three-dimensional array.
As we draw closer, we see that the three-faceted planes of the museum are fabricated out of rectangular panels made of white bronze that was poured directly into dammed forms on the concrete floor of the foundry, producing a surface texture similar to both metal and stone.
I’m now more inclined to attribute Looseleaf’s power to its visual texture than to some cognitive media-style abstraction. And the visual texture owes more to the beauty (yes, beauty!) of the original pdfs from the Vasulka Archive. Perhaps the demo is best understood not as a prototype generic tool, but as a specific curated experience in its own right, with form and content claiming equal importance in its overall success.
Even so, I think there are some general lessons that can be drawn from this demo:
Content is not inert
Visual texture lets content breathe
Visual texture lets the eye wander without losing itself
Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers.
The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business.