wabi-sabi
The most incidental detail
Bells
Most Japanese bells when hung still have on them one or more rough lines obviously arising in horizontal mold joints. These lines are not removed in fettling the bell, and they seem to be regarded not as defects but rather as a reminder of the reality of the founder’s interaction with his materials. One is reminded of the ceramics that are most treasured in Japan which usually have some unexpected tool marks or irregularity resulting from a kiln mishap.
Roughness
Roughness is the odd shape, the quick brush stroke, the irregular column size or spacing, the change in pattern at the corner – it is adjusting to conditions as they present themselves with meaning, but without ego or contrived deliberation.
Though it may look superficially flawed, especially with human perception accustomed to mass-produced regularity and perfection as a goal, an object with roughness is often more precise because it comes about from paying attention to what matters most, and letting go of what matters less.
Wabi-sabi
Sabi is an aesthetic term, rooted in a given concern. It is concerned with chronology, with time and its effects, with product.
Wabi is a more philosophical concept, a quality not attached merely to a given object. It is concerned with manner, with process, with direction.
Optical Glass House
A Building by Hiroshi NakamuraA façade of some 6,000 pure-glass blocks (50mm x 235mm x 50mm) was employed. The pure-glass blocks, with their large mass-per-unit area, effectively shut out sound and enable the creation of an open, clearly articulated garden that admits the city scenery. To realize such a façade, glass casting was employed to produce glass of extremely high transparency from borosilicate, the raw material for optical glass. The casting process was exceedingly difficult, for it required both slow cooling to remove residual stress from within the glass, and high dimensional accuracy. Even then, however, the glass retained micro-level surface asperities, but we actively welcomed this effect, for it would produce unexpected optical illusions in the interior space.
How the light gets in
A Quote by Leonard CohenThere is a crack in everything.
That's how the light gets in.Is perfection boring?
An Article by Ralph AmmerWe love to see the process, not just the result. The imperfections in your work can be beautiful if they show your struggle for perfection, not a lack of care.
Pylons
Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers.
The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business.