Thermal information is not differentiated in our memory; rather it is retained as a quality, or underlying tone, associated with the whole experience of the place. It contributes to our sense of the particular personality, or spirit, that we identify with that place. In remembering the spirit of a place, we can anticipate that if we return, we will have the same sense of comfort or relaxation as before.
There is an underlying assumption that the best thermal environment never needs to be noticed, and that once an objectively "comfortable" thermal environment has been provided, all of our thermal needs will have been met. The use of all of our extremely sophisticated environmental control systems is directed to this one end—to produce standard comfort zone conditions.
Textbooks on water-system engineering state that supply mains are generally installed on the north side of the street in the Northern Hemisphere and on the south side in the Southern Hemisphere, so that the sun will warm them. In both hemispheres they are supposed to be on the east side of north-south streets, on the premise that the afternoon sun is warmer than the morning sun.
The predicted mean vote (PMV) was developed by Povl Ole Fanger at Kansas State University and the Technical University of Denmark as an empirical fit to the human sensation of thermal comfort. It was later adopted as an ISO standard. It predicts the average vote of a large group of people on the a seven-point thermal sensation scale where:
Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers.
The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business.