Pair Design: Better Together A Book by Gretchen Anderson & Christopher Noessel mmbolg.files.wordpress.com Pair design is the counterintuitive practice of getting more and better UX design done by putting two designers together as thought partners to solve design problems. It’s counterintuitive because you might expect that you could split them up to work in parallel to get double the design done, but for many situations, you’d be wrong. This document will help explain what pair design is, how it works, and tour through the practicalities of implementing it in your practice. It involves two brainsA distinct and complementary stanceGens and synthsWe come as a teamStarting off with pair design+1 More designcollaboration
Pylons Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers. The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business. Brian Hayes, Infrastructure: A Guide to the Industrial Landscape The Pylon Appreciation Society metalgeometryenergypylons