Kasuri is thus a textile that appears to have been rubbed. Since the edges of the pattern do not align, they take on the nature of an odd number rather than an even number. Without this rubbing or smudging, kasuri could never have been. However, since it is precisely this misalignment and blurry effect that is the source of kasuri’s beauty, we are presented with an interesting problem. I will call this problem ‘the beauty of odd numbers’.
I was in a hotel room a few years ago and I woke up in the early hours and glanced at the digital clock radio. It displayed the time using six digits HH:MM:SS
Just at the moment I glanced it flicked over to 04:04:04. It occurred to me that, using calculator word logic, this would read ‘ho ho ho’ if viewed upside down. That year I produced a Christmas card with those digits on the front and ‘Christmastime’ printed upside down as the message on the inside. In the absence of any further explanation, absolutely nobody understood the card.
The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form.
[In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top.
When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading.