Constraints
The minimum condition
You can almost tell which software they were designed in
One brick
To abandon control
Constrained by the medium
The fountainhead of beauty
Freedomless freedom
Hand and brain design
The 1916 Zoning Resolution
Autonomous constraints
When Movable Type ate the blogosphere
Any imaginable shape
A normal wooden pencil
Every exit is an entrance somewhere
When design gets too easy
Design has invariably exhibited styles because some clear limitations on freedom of choice are psychologically necessary to nearly all designers. When design gets too easy it becomes difficult.
Changing constraints
The Constraints Keep Changing
The explicit listing of known constraints in the design program helps here. The designer can periodically scan the list, asking, “Can this constraint now be removed because the world has changed? Can it be entirely circumvented by working outside the design space?”
The momentum of making
Limitations narrow a big process into a smaller, more understandable space to explore. It’s the difference between swimming in a pool and being dropped off in the middle of the ocean with no land in sight. Those limitations also become the basis for the crucial first steps in improvisation. After those, the momentum of making accelerates as ideas are quickly generated without judgment.
Necessity
Loos's need to respond positively to the difficulties he encountered appeared in the errors that occurred during the construction of the Villa Moller. When the foundations were not laid as specified, he could not afford to dig them up and start again; instead, Loos thickened the form of one side wall to accommodate the mistake, making the thickened wall and emphatic side frame for the front. The formally pure properties of Villa Moller were achieved by working with many similar mistakes and impediments Loos had to take as facts on the ground; necessity stimulated his sense of form. Wittgenstein, knowing no financial necessity, had no such creative dialogue between form and error.
“Design” is now “Product”
An Article by Dorian TaylorDesign has very little to do with what tools or methodologies you use, or what your job title is, or what you have a degree in, or even anything like “creativity”; design is about your relationship to constraints. Rather: to what extent are you defining constraints rather than just obeying them? Design is about taking a universe of possibilities and converging onto exactly one outcome. Being handed a set of constraints which you treat like immutable laws of physics (because many of them are) and solving within that envelope is what engineering is. To wit: what most designers are doing most of the time is actually a form of engineering, and engineers are always doing at least some design.
This is because genuine design—the power to define constraints—is a privileged political position within an organization, and not everybody can occupy it. In other words, the “seat at the table” comes first. Design is Steve Jobs infamously dropping an iPod prototype into his fish tank, pointing at the bubbles coming out and yelling at his staff to make it thinner. It doesn’t matter what your title is; Jobs is the designer in that scenario.
Delight is constraints, joyfully embraced
An Article by Craig ModAnd what is delight? For me, delight is born from a tool’s intuitiveness. Things just working without much thought or fiddling. Delight is a simple menu system you almost never have to use. Delight is a well-balanced weight on the shoulder, in the hand. Delight is the just-right tension on the aperture ring between stops. Delight is a single battery lasting all day. Delight is being able to knock out a 10,000 iso image and know it'll be usable. Delight is extracting gorgeous details from the cloak of shadows. Delight is firing off a number of shots without having to wait for the buffer to catch up. Delight is constraints, joyfully embraced.
The Design Diagram
An Idea by Charles Eames & Ray EamesThis Eames drawing, often referred to as the Design Diagram, was created for a 1969 exhibition at the Louvre entitled, What is Design? Charles and Ray mailed it to the exhibition curator to augment their answers to a series of questions she had posed.
Recognizing Constraints
An Article by Jeremy WagnerSuper Nintendo games were the flavor of the decade when I was younger, and there’s no better example of building incredible things within comparably meager constraints. Developers on SNES titles were limited to, among other things:
- 16-bit color.
- 8 channel stereo output.
- Cartridges with storage capacities measured in megabits, not megabytes.
- Limited 3D rendering capabilities on select titles which embedded a special chip in the cartridge.
Despite these constraints, game developers cranked out incredible and memorable titles that will endure beyond our lifetimes. Yet, the constraints SNES developers faced were static. You had a single platform with a single set of capabilities. If you could stay within those capabilities and maximize their potential, your game could be played—and adored—by anyone with an SNES console.
PC games, on the other hand, had to be developed within a more flexible set of constraints. I remember one of my first PC games had its range of system requirements displayed on the side of the box:
- Have at least a 386 processor—but Pentium is preferred.
- Ad Lib or PC speaker supported—but Sound Blaster is best.
- Show up to the party with at least 4 megabytes of RAM—but more is better.
Embracing design constraints
An Article by Adrian RoselliConstraints have been shown to generally improve innovation. Giving targets and parameters helps ensure a team is working in unison. Identifying what is out of bounds can further focus that team.
The Microsoft Sound
A Quote by Brian EnoThe thing from the agency said, "We want a piece of music that is inspiring, universal, blah- blah, da-da-da, optimistic, futuristic, sentimental, emotional," this whole list of adjectives, and then at the bottom it said "and it must be 3 1/4 seconds long."
I thought this was so funny and an amazing thought to actually try to make a little piece of music. It's like making a tiny little jewel.
In fact, I made 84 pieces. I got completely into this world of tiny, tiny little pieces of music. I was so sensitive to microseconds at the end of this that it really broke a logjam in my own work. Then when I'd finished that and I went back to working with pieces that were like three minutes long, it seemed like oceans of time.
The drop press
The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form.
[In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top.
When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading.