heat
Winter is by far the oldest of the seasons
...and we feel warm because it is cold out-of-doors.
Retained as a quality
Thermal information is not differentiated in our memory; rather it is retained as a quality, or underlying tone, associated with the whole experience of the place. It contributes to our sense of the particular personality, or spirit, that we identify with that place. In remembering the spirit of a place, we can anticipate that if we return, we will have the same sense of comfort or relaxation as before.
Two thermal archetypes
The hearth, a refuge of dry warmth from a cold world, and the oasis, a preserve of coolness and moisture in a desert wilderness.
The notion of a thermal optimum persists
There is an underlying assumption that the best thermal environment never needs to be noticed, and that once an objectively "comfortable" thermal environment has been provided, all of our thermal needs will have been met. The use of all of our extremely sophisticated environmental control systems is directed to this one end—to produce standard comfort zone conditions.
Warmed by the afternoon sun
Textbooks on water-system engineering state that supply mains are generally installed on the north side of the street in the Northern Hemisphere and on the south side in the Southern Hemisphere, so that the sun will warm them. In both hemispheres they are supposed to be on the east side of north-south streets, on the premise that the afternoon sun is warmer than the morning sun.
Predicted Mean Vote
A DefinitionThe predicted mean vote (PMV) was developed by Povl Ole Fanger at Kansas State University and the Technical University of Denmark as an empirical fit to the human sensation of thermal comfort. It was later adopted as an ISO standard. It predicts the average vote of a large group of people on the a seven-point thermal sensation scale where:
- +3 = hot
- +2 = warm
- +1 = slightly warm
- 0 = neutral
- -1 = slightly cool
- -2 = cool
- -3 = cold
The drop press
The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form.
[In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top.
When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading.