As inanimate as it was gigantic A Fragment by John Ruskin blog.ayjay.org And among such false means largeness of scale in the dwelling-house was of course one of the easiest and most direct. All persons, however senseless or dull, could appreciate size: it required some exertion of intelligence to enter into the spirit of the quaint carving of the Gothic times, but none to perceive that one heap of stones was higher than another. And therefore, while in the execution and manner of work the Renaissance builders zealously vindicated for themselves the attribute of cold and superior learning, they appealed for such approbation as they needed from the multitude, to the lowest possible standard of taste; and while the older workman lavished his labor on the minute niche and narrow casement, on the doorways no higher than the head, and the contracted angles of the turreted chamber, the Renaissance builder spared such cost and toil in his detail, that he might spend it in bringing larger stones from a distance; and restricted himself to rustication and five orders, that he might load the ground with colossal piers, and raise an ambitious barrenness of architecture, as inanimate as it was gigantic, above the feasts and follies of the powerful or the rich. architecturesizescale
The drop press The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form. [In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top. When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading. Cyril Stanley Smith, A Search for Structure Separation of surface and structure