Less, but better There must be millions less of things, less words, less gestures, less of everything. But every word and every gesture will become more valuable. If we can put it all into perspective we will need less things as a result. Sophie Lovell & Dieter Rams, Dieter Rams: As Little Design as Possible Omit needless wordsTo be truly simple makingrestraintproductionwasteminimalism
From consumption to production I see no other solution (political, economic) to the problems of mankind than the formation of small responsible communities involved in permaculture and appropriate technology. I believe that the days of centralised power are numbered, and that a re-tribalisation of society is an inevitable, if sometimes painful, process. The greatest change we need to make is from consumption to production, even if on a small scale, in our own gardens. Bill Mollison, Introduction to Permaculture societyconsumptionproduction
All-use environments Until the nineteenth century, virtually all cities were “all use” environments. Craft-scale production was typically carried out in a workshop below the home of the craftsperson, which often also served as the site of exchange. Michael Sorkin, 20 Minutes in Manhattan Small economies productionwork
Biggering I meant no harm. I most truly did not. But I had to grow bigger. So bigger I got. I biggered my factory. I biggered my roads. I biggered my wagons. I biggered the loads of the Thneed’s I shipped out. I was shipping them forth to the South! To the East! To the West! To the North! I went right on biggering...selling more Thneed’s. And I biggered my money, which everyone needs. Dr. Seuss, The Lorax capitalismproduction
This thing is a Thneed "Look, Lorax," I said. "There's no cause for alarm. I chopped just one tree. I am doing no harm. I'm being quite useful. This thing is a Thneed. A Thneed's a Fine-Something-That-All-People-Need! It’s a shirt. It's a sock. It's a glove. It's a hat. But it has other uses. Yes, far beyond that. You can use it for carpets. For pillows! For sheets! Or curtains! Or covers for bicycle seats!" The Lorax said, "Sir! You are crazy with greed. There is no one on earth who would buy that fool Thneed!" Dr. Seuss, The Lorax production
The life-giving continuum In System A, creation and production are organic in character, and are governed by human judgments that emanate from the underlying wholeness of situations, conditions, and surroundings. In System B, the production process is thought of as mechanical. What matters are regulations, procedures, categories, money, efficiency, and profit: all the machinery designed to make society run smoothly, as if society was working as a great machine. The production process is rarely context-sensitive. Wholeness is left out. Identifying these two categories helps us sharpen and clarify the range of differences among ways of creating the environment that exist in different societies. And the two categories serve to identify a dimension of great importance: the dimension that runs from more life-giving to less life-giving. Christopher Alexander, The Battle for the Life and Beauty of the Earth lifeproduction
Muda, Muri, Mura An Article mag.toyota.co.uk Eliminating waste is the key to efficiency – in the Toyota Production System, this is termed as: Muda (waste), Muri (overburden), and Mura (irregularity). productionwastemanagementefficiency
The drop press The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form. [In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top. When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading. Cyril Stanley Smith, A Search for Structure Separation of surface and structure