In ways you didn't anticipate A Quote by Patrick Hebron www.noemamag.com I always have a hard time wrapping my mind around some of the classic user questions: What is this thing for, is it for novices or professionals, etc? I do my best to avoid these questions, because the best thing you can possibly accomplish as the maker of a tool is to build something that gets used in ways you didn’t anticipate. If you’re building a tool that gets used in exactly the ways that you wrote out on paper, you shot very low. You did something literal and obvious. All sorts of ways to use the machineHacking is the opposite of marketingStretching the productThis tactile form of doodling toolssurpriseux
The drop press The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form. [In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top. When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading. Cyril Stanley Smith, A Search for Structure Separation of surface and structure