The way it has been made The internal structure of a work of art in metal can often throw as much, or more, light on its origin as can be derived from stylistic analysis. Moreover, the techniques employed can provide clues to the habits of mind of the people who originated them. …Perhaps the most important reason for structural studies of museum objects is that the intimate knowledge so derived as to the way in which an object has been made adds so greatly to the aesthetic enjoyment of it. Very often some detail and sometimes the whole of an effective design arises directly in the exploitation of the merits and the overcoming of the difficulties of a specific technique, in the reaction between the artist’s fingers and his material. The Interpretation of Microstructures of Metallic Artifacts historytechniquemakingobjects
ƒ/8 and be there "f/8 and be there" is an expression popularly used by photographers to indicate the importance of taking the opportunity for a picture rather than being too concerned about using the best technique. Often attributed to the noir-style New York City photographer Weegee, it has come to represent a philosophy in which, on occasion, action is more important than reflection. Wikipedia en.wikipedia.org photographytechnique
Iconography It is understandable that those students who must work from reproductions of works of art are usually more interested in iconography than in the more subtle questions of technique and quality, but it is regrettable that technical ignorance should so frequently prevent art historians from considering the whole experience of the artist. Cyril Stanley Smith, A Search for Structure artexperiencetechnique
Understanding technique Technique is an essential aspect of any work of art from a trivial trinket to the greatest painting, and some specialized study of it is essential to full appreciation. Though museum labels and catalogs refer to materials and processes — “bronze,” “fresco,” “parcel gilt,” “tempera,” “lacquer on wood,” and so on — they usually display only superficial attention to the essential details of the artist’s technique. Cyril Stanley Smith, A Search for Structure technique
Resonances The resonances arising in workmanship are often very subtle. The fact that the material itself guides the tool differently in different processes of working introduces changes in the overall relationship of curvatures. The smooth curves of surfaces approaching the edge of a jade axe that come about from innumerable abrasive particles moving against a slightly yielding and mechanically unconstrained backing would seem incongruous if other surfaces or outlines were present that had come from cleavage or from the geometric motions of a machine. These could be produced easily enough, but the eye would not establish larger resonances among them. Cyril Stanley Smith, A Search for Structure toolstechniquecraft
Pylons Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers. The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business. Brian Hayes, Infrastructure: A Guide to the Industrial Landscape The Pylon Appreciation Society metalgeometryenergypylons