-2000 Lines Of Code An Article by Andy Hertzfeld www.folklore.org Bill Atkinson...who was by far the most important Lisa implementor, thought that lines of code was a silly measure of software productivity. He thought his goal was to write as small and fast a program as possible, and that the lines of code metric only encouraged writing sloppy, bloated, broken code. ...He was just putting the finishing touches on the optimization when it was time to fill out the management form for the first time. When he got to the lines of code part, he thought about it for a second, and then wrote in the number: -2,000. I'm not sure how the managers reacted to that, but I do know that after a couple more weeks, they stopped asking Bill to fill out the form, and he gladly complied. The amount of work not done metricscodemanagementproductivity
Baumol’s cost disease Baumol's cost disease (or the Baumol effect) is the rise of salaries in jobs that have experienced no or low increase of labor productivity, in response to rising salaries in other jobs that have experienced higher labor productivity growth. The rise of wages in jobs without productivity gains derives from the requirement to compete for employees with jobs that have experienced gains and so can naturally pay higher salaries, just as classical economics predicts. For instance, if the retail sector pays its managers 19th-century-style salaries, the managers may decide to quit to get a job at an automobile factory, where salaries are higher because of high labor productivity. Thus, managers' salaries are increased not by labor productivity increases in the retail sector but by productivity and corresponding wage increases in other industries. Wikipedia en.wikipedia.org economicsproductivitywork
Parkinson's Law Work expands so as to fill the time available for its completion. Wikipedia en.wikipedia.org Hofstadter's Law worktimeproductivity
The urge to be done "Flow" is often a synonym for ignorance and laziness. It's also a sign of haste, the urge to be done. Verlyn Klinkenborg, Several Short Sentences About Writing productivity
The absent-minded professor There are three variants of procrastination, depending on what you do instead of working on something: you could work on (a) nothing, (b) something less important, or (c) something more important. That last type, I'd argue, is good procrastination. That's the "absent-minded professor," who forgets to shave, or eat, or even perhaps look where he's going while he's thinking about some interesting question. His mind is absent from the everyday world because it's hard at work in another. Paul Graham, Good and bad procrastination procrastinationproductivity
Always produce "Always produce" is also a heuristic for finding the work you love. If you subject yourself to that constraint, it will automatically push you away from things you think you're supposed to work on, toward things you actually like. "Always produce" will discover your life's work the way water, with the aid of gravity, finds the hole in your roof. Paul Graham, How to do what you love Flow interesting (The Meander) productivity
Background textures of work An Article by Lucy Keer lucykeer.com One thing I've been enjoying about working as a technical writer is that the minute-by-minute texture of the work feels right. Something about formatting text, faffing about with SVGs, trying to rewrite a sentence more clearly... it's just enjoyable in itself, and I feel at home with it. ...Working as a programmer was very much not like that. There's something in the rough vicinity of professional dev work that I do like, which I could probably label as 'iterative hobbyist tinkering with websites'. I like working on something with a strong visual component, and I like to be inside of a fast feedback loop, and I'm mostly interested in just somehow bodging through until it works. I'm not very interested in either the computer-sciencey side of programming — data structures, algorithms — or the software-engineerey side of making things run reliably at scale in a maintainable way. So maybe it's not surprising that the minute-by-minute texture of professional programming was just... kind of bad. Occasional fun bits when I got into something, but the background experience was not fun. workproductivitymaking
Efficiency is the Enemy An Article fs.blog Many of us have come to expect work to involve no slack time because of the negative way we perceive it. In a world of manic efficiency, slack often comes across as laziness or a lack of initiative. Without slack time, however, we know we won’t be able to get through new tasks straight away, and if someone insists we should, we have to drop whatever we were previously doing. One way or another, something gets delayed. The increase in busyness may well be futile. It’s Time to Embrace Slow Productivity efficiencyproductivitywork
It’s Time to Embrace Slow Productivity An Article by Cal Newport www.newyorker.com The central goal of Slow Productivity is to keep an individual worker’s volume at a sustainable level. A natural fear is that by reducing the amount of work each employee tackles at any given time, it might reduce the total amount of work an organization is able to complete, making it less competitive. This fear is unfounded. As argued, when an individual’s work volume increases, so does the accompanying overhead and stress, reducing both the time remaining to actually execute the tasks and the quality of the results. If you instead enable the individual to work more sequentially, focussing on a small number of things at a time, waiting until she is done before bringing on new obligations, the rate at which she completes tasks might actually increase. Efficiency is the Enemy productivity
Beyond 10× An Article by Matthew Ström matthewstrom.com Forget 10×. With a focus on outcomes and an eye towards the border between net-positive and net-negative work, any team can push their productivity beyond their previous limits. ...If you can perform one task better than most people, you might be a 10× designer or developer or product manager (or whatever you are). But if your team can find small ways to make many of their tasks net-positive, 10× is just the start. productivity
Touch the keys An Article by Rach Smith rachsmith.com In his course Being Productive: Simple Steps to Calm Focus, Kourosh Dini emphasises the importance of taking a moment to “be with” the work every day (or however frequently you need to tackle a project). “Being with” your work is to be fully present and intentional about that activity and doing nothing else. This idea was inspired by Dini’s piano teacher, who encouraged him to sit at his piano and touch the keys every day. Even on the days that he felt he had no time or inclination to practice. Sometimes touching the keys would lead to a good practice session, even when he didn’t feel like it would before he actually gave it a go. Just like Dini, I find that once I give the task my full attention and be present, the actual doing of it turns out to be much easier and more enjoyable than my mind had been expecting. As usual, the resistance to getting started is far more uncomfortable than actually doing the thing. To pick up my pen productivityworkcreativitypractice
Nobody gives a hoot about groupthink An Article by Baldur Bjarnason www.baldurbjarnason.com Two relatively common ‘fashions’ today are real-time collaboration and shared data repositories of one kind or another. Both increase productivity in the naive sense. We work more; everybody is more active; the group feels more cohesive. The downside is that they also both tend to reduce the quality of the work and increase busywork. On that of the highest authorityPersonal Information Management (PIM) productivitycollaborationinformation
A Search for Structure A Book by Cyril Stanley Smith mitpress.mit.edu ApologiaGrain Shapes and Other Metallurgical Applications of TopologyStructure, Substructure, and SuperstructureThe Interpretation of Microstructures of Metallic ArtifactsMatter versus Materials: A Historical View+18 More Results of a search makingmaterialcraftstyle
Apologia A Chapter If the features of many are comparedPebbles on the beachHalf-formed perceptionInterdisciplinary
Grain Shapes and Other Metallurgical Applications of Topology An Essay The boundary can tell much about what is inside topologymetal
Structure, Substructure, and Superstructure An Essay The monotonous perfectionOn beauty bareIn a mass of large bubblesThe role of history in structuresA kind of moiré pattern+1 More
The Interpretation of Microstructures of Metallic Artifacts An Essay The meaning of objectsSomething akin to styleFrom the head of JoveThe objects themselves speak loudlyThe way it has been made+1 More
Matter versus Materials: A Historical View An Essay Atoms and aggregatesAesthetically motivated curiosityWhose eyes had seen and whose fingers had feltThe alchemists in their mixingsA holograph of itself+3 More
Iconography It is understandable that those students who must work from reproductions of works of art are usually more interested in iconography than in the more subtle questions of technique and quality, but it is regrettable that technical ignorance should so frequently prevent art historians from considering the whole experience of the artist. artexperiencetechnique
Understanding technique Technique is an essential aspect of any work of art from a trivial trinket to the greatest painting, and some specialized study of it is essential to full appreciation. Though museum labels and catalogs refer to materials and processes — “bronze,” “fresco,” “parcel gilt,” “tempera,” “lacquer on wood,” and so on — they usually display only superficial attention to the essential details of the artist’s technique. technique
Bells Most Japanese bells when hung still have on them one or more rough lines obviously arising in horizontal mold joints. These lines are not removed in fettling the bell, and they seem to be regarded not as defects but rather as a reminder of the reality of the founder’s interaction with his materials. One is reminded of the ceramics that are most treasured in Japan which usually have some unexpected tool marks or irregularity resulting from a kiln mishap. Chapel of St. Ignatius, Seattle, 1995–7 flawswabi-sabi
Nearer to the surface If in the following I overemphasize the Orient, this is simply because in the Far East the properties of materials are a little nearer to the surface, a little more consciously a part of what the artist is trying to show. The naturalistic aspects of Oriental philosophy encourage a sensitivity to the quality of materials — or is it the inverse, that an early enjoyment of stone, wood, clay, and fiber gave rise to the philosopher’s perception of the soul in all natural things comparable to man himself? Westerners tend to override materials, usually in ignorance, but sometimes proudly as a tour de force. materialsoul
The drop press The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form. [In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top. When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading. Separation of surface and structure
Big things and little things It is hardly possible that human beings could have decided logically that they needed to develop language in order to communicate with each other before they had experienced pleasurable interactive communal activities like singing and dancing. Aesthetic curiosity has been central to both genetic and cultural evolution. All big things grow from little things, but new little things will be destroyed by their environment unless they are cherished for reasons more like love than purpose. aestheticsevolutionwords
What's the difference? I well remember an occasion in 1962 when in a remote Iranian village I asked a blacksmith famous for his superior penknives to tell me the difference between iron and steel. “What’s the difference?” he replied. “What’s the difference between an oak tree and a willow — they have different natures and one must adapt to them.” He did not accept the suggestion that some material absorbed from the fire’s charcoal might have something to do with it, and he would not have understood a word of any lecture I could have given him on diffusion, crystal structure, and phase transformations; yet he could make a good knife and I could not. making
The scale of human experience It is the scale of human experience, from which thought and imagination take off, and to which they must return. creativityexperience
The edifice from which they came A list of types of bricks used in the Hagia Sophia may help one to build an interesting brick wall, but it poorly suggests the great edifice from which they came. Atoms and aggregates knowledgecollections
The interplay of pattern and texture Some of the more enjoyable surfaces (for example, the grain of a fine mahogany table top or a Japanese sword) have an interplay between pattern and texture which, though two-dimensional, suggests the unseen internal three-dimensional array. texture
Resonances The resonances arising in workmanship are often very subtle. The fact that the material itself guides the tool differently in different processes of working introduces changes in the overall relationship of curvatures. The smooth curves of surfaces approaching the edge of a jade axe that come about from innumerable abrasive particles moving against a slightly yielding and mechanically unconstrained backing would seem incongruous if other surfaces or outlines were present that had come from cleavage or from the geometric motions of a machine. These could be produced easily enough, but the eye would not establish larger resonances among them. toolstechniquecraft
Fine arts and decorative arts The fine arts are conscious and essentially individual in tradition. The quantitative and economic aspects of the decorative arts, on the other hand, make them intrinsically repetitive. Because of this, their aesthetic qualities have a very intimate relationship to the technology of materials, and their design is thereby basically affected. In addition to the qualitative need for repetitive detail in design, the decorative arts have a quantitative requirement, namely the imperative of covering large areas or making large numbers of individual objects. artornament
Replication Consider also the development of mass-production methods involving the casting of molten metals. Though the finest castings were made individually by the lost-wax process, the majority of casting from the earliest days have been designed expressly to facilitate molding. As with punches and dies, most foundry processes have the characteristic that the careful work of the master designer is involved only once, whereafter replication takes over.
Reproduction The success of a mechanic’s, or a machine’s, reproduction of a thing depends on his, or its, sensitivity to whatever qualities are important, just as the skill of the designer lies in the proper appreciation of surface qualities in terms of structure and shape variation that come from the intended means of production. making
The inner nature of material The work of an artist in getting the details that he wants is greatly facilitated if he selects a material whose inner nature makes it want to take the desired shape. A state of energetic repose materialdetails
The idea grows as they work As they work, the experience of the material under the artist's fingers subtly interacts with the idea in their mind to give the finished work some quality that was rarely fully anticipated. A few artists seem to have such a feeling for their materials that the prevision needs little modification; most say that the idea grows as they work experimentally. On GreatnessThe situation talks backThe discoveries you make in the makingWhen I was 22 craftmaterialart
True artistry The best of all examples of a satisfactory art form based upon the inner nature of a metal is provided by Japanese swords. Our perception of beauty seems to involve the interaction of several patterns having origin and significance at many different levels of space, time, matter, and spirit. In the Japanese sword blade there is heterogeneity in both the macrostructure and the microstructure. The manner of forging, the heat treatment, and the final polishing operation are all uniquely Japanese techniques, and all make necessary contributions to the final quality of the blades. The shape along would be simplistic form; the forged texture of the steel without heat treatment would at best faintly echo the beauty of grained wood; the outlines of the quench-hardened zone at the edge would be sharp and uninteresting if it depended only on the control of cooling rate during quenching; and the polish would be uniform glitter if the metal were homogeneous. With true artistry all these are made to interact. beautycraft
Simple variations of the parts Symmetry, indeed, has been grossly overemphasized in both art and science: its main value is in giving meaning to its absence, dissymmetry, without which there could be no hierarchy. The eye is repulsed by complexity if no order is detected, but it can be delighted by repetition, translation, rotation, reflection, magnification, and other simple variations of the parts. geometrypatterns