Writing, Briefly An Article by Paul Graham www.paulgraham.com As for how to write well, here's the short version: Write a bad version 1 as fast as you can; rewrite it over and over; if you can't get started, tell someone what you plan to write about, then write down what you said; expect 80% of the ideas in an essay to happen after you start writing it; start writing when you think of the first sentence; write about stuff you like; learn to recognize the approach of an ending, and when one appears, grab it. v0.crapThe situation talks back writing
Writing and Speaking An Essay by Paul Graham paulgraham.com Being a really good speaker is not merely orthogonal to having good ideas, but in many ways pushes you in the opposite direction...there's a tradeoff between smoothness and ideas. All the time you spend practicing a talk, you could instead spend making it better. writingspeechcommunicationpractice
Write Simply An Essay by Paul Graham www.paulgraham.com I try to write using ordinary words and simple sentences. That kind of writing is easier to read, and the easier something is to read, the more deeply readers will engage with it. The less energy they expend on your prose, the more they'll have left for your ideas. Several Short Sentences About Writing writing
The Age of the Essay An Essay by Paul Graham www.paulgraham.com EssayerExpressing ideas helps to form themFlow interesting (The Meander) Follow the brushThe Anxiety of Sequence writing
Early work An Essay by Paul Graham www.paulgraham.com Imagine if we could turn off the fear of making something lame. Imagine how much more we'd do. The right way to deal with new ideasFocus on the rate of change creativityskillideas
What doesn't seem like work? An Essay by Paul Graham paulgraham.com The stranger your tastes seem to other people, the stronger evidence they probably are of what you should do. So I bet it would help a lot of people to ask themselves about this explicitly. What seems like work to other people that doesn't seem like work to you? workinterestlife
The Top Idea in Your Mind An Essay by Paul Graham paulgraham.com I think most people have one top idea in their mind at any given time. That's the idea their thoughts will drift toward when they're allowed to drift freely. And this idea will thus tend to get all the benefit of that type of thinking, while others are starved of it. Which means it's a disaster to let the wrong idea become the top one in your mind. ideas
Cities and Ambition An Essay by Paul Graham paulgraham.com Boston says you should be smarterFlorence and MilanA city speaks to you mostly by accidentCity messages citiesambition
Taste for Makers An Essay by Paul Graham paulgraham.com If there is such a thing as beauty, we need to be able to recognize it. We need good taste to make good things. Instead of treating beauty as an airy abstraction, to be either blathered about or avoided depending on how one feels about airy abstractions, let's try considering it as a practical question: how do you make good stuff? You feel this when you start to design thingsGood design is simpleGood design is timelessGood design is often slightly funnyGood design is hard, but looks easy+3 More Beauty in flight beautytastedesign
Good and bad procrastination An Essay by Paul Graham paulgraham.com The absent-minded professorYou can't look a big problem too directly in the eye
The still life effect A Fragment by Paul Graham paulgraham.com If you're going to spend years working on something, you'd think it might be wise to spend at least a couple days considering different ideas, instead of going with the first that comes into your head. You'd think. But people don't. In fact, this is a constant problem when you're painting still lifes. You plonk down a bunch of stuff on a table, and maybe spend five or ten minutes rearranging it to look interesting. But you're so impatient to get started painting that ten minutes of rearranging feels very long. So you start painting. Three days later, having spent twenty hours staring at it, you're kicking yourself for having set up such an awkward and boring composition, but by then it's too late. ideasart
How to do what you love An Essay by Paul Graham paulgraham.com To do something well you have to like itWow, that's pretty coolPrestige is just fossilized inspirationAlways produce worklife
Hackers and Painters An Essay by Paul Graham www.paulgraham.com A great painting has to be better than it has to be
A Search for Structure A Book by Cyril Stanley Smith mitpress.mit.edu ApologiaGrain Shapes and Other Metallurgical Applications of TopologyStructure, Substructure, and SuperstructureThe Interpretation of Microstructures of Metallic ArtifactsMatter versus Materials: A Historical View+18 More Results of a search makingmaterialcraftstyle
Apologia A Chapter If the features of many are comparedPebbles on the beachHalf-formed perceptionInterdisciplinary
Grain Shapes and Other Metallurgical Applications of Topology An Essay The boundary can tell much about what is inside topologymetal
Structure, Substructure, and Superstructure An Essay The monotonous perfectionOn beauty bareIn a mass of large bubblesThe role of history in structuresA kind of moiré pattern+1 More
The Interpretation of Microstructures of Metallic Artifacts An Essay The meaning of objectsSomething akin to styleFrom the head of JoveThe objects themselves speak loudlyThe way it has been made+1 More
Matter versus Materials: A Historical View An Essay Atoms and aggregatesAesthetically motivated curiosityWhose eyes had seen and whose fingers had feltThe alchemists in their mixingsA holograph of itself+3 More
Iconography It is understandable that those students who must work from reproductions of works of art are usually more interested in iconography than in the more subtle questions of technique and quality, but it is regrettable that technical ignorance should so frequently prevent art historians from considering the whole experience of the artist. artexperiencetechnique
Understanding technique Technique is an essential aspect of any work of art from a trivial trinket to the greatest painting, and some specialized study of it is essential to full appreciation. Though museum labels and catalogs refer to materials and processes — “bronze,” “fresco,” “parcel gilt,” “tempera,” “lacquer on wood,” and so on — they usually display only superficial attention to the essential details of the artist’s technique. technique
Bells Most Japanese bells when hung still have on them one or more rough lines obviously arising in horizontal mold joints. These lines are not removed in fettling the bell, and they seem to be regarded not as defects but rather as a reminder of the reality of the founder’s interaction with his materials. One is reminded of the ceramics that are most treasured in Japan which usually have some unexpected tool marks or irregularity resulting from a kiln mishap. Chapel of St. Ignatius, Seattle, 1995–7 flawswabi-sabi
Nearer to the surface If in the following I overemphasize the Orient, this is simply because in the Far East the properties of materials are a little nearer to the surface, a little more consciously a part of what the artist is trying to show. The naturalistic aspects of Oriental philosophy encourage a sensitivity to the quality of materials — or is it the inverse, that an early enjoyment of stone, wood, clay, and fiber gave rise to the philosopher’s perception of the soul in all natural things comparable to man himself? Westerners tend to override materials, usually in ignorance, but sometimes proudly as a tour de force. materialsoul
The drop press The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form. [In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top. When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading. Separation of surface and structure
Big things and little things It is hardly possible that human beings could have decided logically that they needed to develop language in order to communicate with each other before they had experienced pleasurable interactive communal activities like singing and dancing. Aesthetic curiosity has been central to both genetic and cultural evolution. All big things grow from little things, but new little things will be destroyed by their environment unless they are cherished for reasons more like love than purpose. aestheticsevolutionwords
What's the difference? I well remember an occasion in 1962 when in a remote Iranian village I asked a blacksmith famous for his superior penknives to tell me the difference between iron and steel. “What’s the difference?” he replied. “What’s the difference between an oak tree and a willow — they have different natures and one must adapt to them.” He did not accept the suggestion that some material absorbed from the fire’s charcoal might have something to do with it, and he would not have understood a word of any lecture I could have given him on diffusion, crystal structure, and phase transformations; yet he could make a good knife and I could not. making
The scale of human experience It is the scale of human experience, from which thought and imagination take off, and to which they must return. creativityexperience
The edifice from which they came A list of types of bricks used in the Hagia Sophia may help one to build an interesting brick wall, but it poorly suggests the great edifice from which they came. Atoms and aggregates knowledgecollections
The interplay of pattern and texture Some of the more enjoyable surfaces (for example, the grain of a fine mahogany table top or a Japanese sword) have an interplay between pattern and texture which, though two-dimensional, suggests the unseen internal three-dimensional array. texture
Resonances The resonances arising in workmanship are often very subtle. The fact that the material itself guides the tool differently in different processes of working introduces changes in the overall relationship of curvatures. The smooth curves of surfaces approaching the edge of a jade axe that come about from innumerable abrasive particles moving against a slightly yielding and mechanically unconstrained backing would seem incongruous if other surfaces or outlines were present that had come from cleavage or from the geometric motions of a machine. These could be produced easily enough, but the eye would not establish larger resonances among them. toolstechniquecraft
Fine arts and decorative arts The fine arts are conscious and essentially individual in tradition. The quantitative and economic aspects of the decorative arts, on the other hand, make them intrinsically repetitive. Because of this, their aesthetic qualities have a very intimate relationship to the technology of materials, and their design is thereby basically affected. In addition to the qualitative need for repetitive detail in design, the decorative arts have a quantitative requirement, namely the imperative of covering large areas or making large numbers of individual objects. artornament
Replication Consider also the development of mass-production methods involving the casting of molten metals. Though the finest castings were made individually by the lost-wax process, the majority of casting from the earliest days have been designed expressly to facilitate molding. As with punches and dies, most foundry processes have the characteristic that the careful work of the master designer is involved only once, whereafter replication takes over.
Reproduction The success of a mechanic’s, or a machine’s, reproduction of a thing depends on his, or its, sensitivity to whatever qualities are important, just as the skill of the designer lies in the proper appreciation of surface qualities in terms of structure and shape variation that come from the intended means of production. making
The inner nature of material The work of an artist in getting the details that he wants is greatly facilitated if he selects a material whose inner nature makes it want to take the desired shape. A state of energetic repose materialdetails
The idea grows as they work As they work, the experience of the material under the artist's fingers subtly interacts with the idea in their mind to give the finished work some quality that was rarely fully anticipated. A few artists seem to have such a feeling for their materials that the prevision needs little modification; most say that the idea grows as they work experimentally. On GreatnessThe situation talks backThe discoveries you make in the makingWhen I was 22 craftmaterialart
True artistry The best of all examples of a satisfactory art form based upon the inner nature of a metal is provided by Japanese swords. Our perception of beauty seems to involve the interaction of several patterns having origin and significance at many different levels of space, time, matter, and spirit. In the Japanese sword blade there is heterogeneity in both the macrostructure and the microstructure. The manner of forging, the heat treatment, and the final polishing operation are all uniquely Japanese techniques, and all make necessary contributions to the final quality of the blades. The shape along would be simplistic form; the forged texture of the steel without heat treatment would at best faintly echo the beauty of grained wood; the outlines of the quench-hardened zone at the edge would be sharp and uninteresting if it depended only on the control of cooling rate during quenching; and the polish would be uniform glitter if the metal were homogeneous. With true artistry all these are made to interact. beautycraft
Simple variations of the parts Symmetry, indeed, has been grossly overemphasized in both art and science: its main value is in giving meaning to its absence, dissymmetry, without which there could be no hierarchy. The eye is repulsed by complexity if no order is detected, but it can be delighted by repetition, translation, rotation, reflection, magnification, and other simple variations of the parts. geometrypatterns