Towards a crap decision You have a thing. You would like to improve said thing. So, you ask a bunch of people what they think, giving more weight to those with relevant expertise. It’s a time-tested strategy. The pitfall here is that if the participants are aware of each other’s contributions, they will almost always automatically switch to consensus-building instead of providing their honest feedback. Worst case scenario: the bandwagon effect gathers steam and drives you toward a crap decision. Baldur Bjarnason, On online collaboration and our obligations as makers of software collaborationdecisions
Adding up to hair-brained I have for myself come to the point where I say that people or groups or governments make the decisions that make sense to them, even if they look totally hair-brained to me. My task then is to figure out the constellation of forces, the pushes and pulls, that in fact do add up to that hair-brained decision-making. Then we can go into the next iteration and say, "What can we do about the balance of the push and the pull that seems to result in totally non-constructive decisions?" Ursula M. Franklin, Every Tool Shapes the Task decisionsrationality
It was all change until the very last second Every work of literature is the result of thousands and thousands of decisions. Intricate, minute decisions—this word or that, here or where, now or later, again and again. It's the living tissue of a writer's choices, Not the fossil record of an ancient, inspired race. Verlyn Klinkenborg, Several Short Sentences About Writing A concept of style decisionscraft
Tracing the answer back I submit that the materials that form the precursors to a product’s implementation have considerable value on their own. My vision is that I will be able to ask a question as mundane as one about the wording of a single button, and trace the answer all the way back to the overarching business strategy to see that it makes sense. Dorian Taylor, Skeleton, Organs, Circulation, Sinew, Skin decisions
Art and science "What the artist does is essentially the same as the scientist. In other words, what you do when you start to do a painting is that you begin with a basic idea, a hypothesis of what you're setting out to do. Then it's just a million yes-no decisions. You try something in the painting, you look at it, and you say, 'N-n-no.' You sort of erase it out, and you move it around a little bit, put in a new line; you go through a million weighings. It's the same thing in science, the only difference in the character of the product." Lawrence Wechler & Robert Irwin, Seeing Is Forgetting the Name of the Thing One Sees sciencedecisionschoice
The complexity and the gray One thing I assume of age is weariness. Damned if I don’t get more tired every day. Tired of what I do, following arcs like lobbed rocks — the inevitability of truth. But the complexity and the gray lie not in the truth, but in what you do with the truth once you have it. Rian Johnson, Knives Out truthlifeagedecisions
The management strategy that saved Apollo 11 An Article by Matthew Ström matthewstrom.com In 1969, the people in charge of Apollo 11 trusted a 23-year-old engineer in a back room of mission control to make one of the most consequential decisions of this decade-defining mission. And they did so in seconds, without deliberating or debating. Next time you’re faced with a decision, ask yourself: how can this decision be made on the lowest level? Have you given your team the authority to decide? If you haven’t, why not? If they’re not able to make good decisions, you’ve missed an opportunity to be a leader. Empower, enable, and entrust them. Take it from NASA: the ability to delegate quickly and decisively was the key to landing men on the moon. Central planning gives poor resultsBeware SAFe, an Unholy Incarnation of Darkness managementdecisionstrust
Goodbye, Google An Article by Douglas Bowman stopdesign.com Without a person at (or near) the helm who thoroughly understands the principles and elements of Design, a company eventually runs out of reasons for design decisions. With every new design decision, critics cry foul. Without conviction, doubt creeps in. Instincts fail. “Is this the right move?” When a company is filled with engineers, it turns to engineering to solve problems. Reduce each decision to a simple logic problem. Remove all subjectivity and just look at the data. Data in your favor? Ok, launch it. Data shows negative effects? Back to the drawing board. And that data eventually becomes a crutch for every decision, paralyzing the company and preventing it from making any daring design decisions. Yes, it’s true that a team at Google couldn’t decide between two blues, so they’re testing 41 shades between each blue to see which one performs better. I had a recent debate over whether a border should be 3, 4 or 5 pixels wide, and was asked to prove my case. I can’t operate in an environment like that. I’ve grown tired of debating such minuscule design decisions. There are more exciting design problems in this world to tackle. designdecisionsdata
Collaborative Information Architecture at Scale An Article by Brandon Dorn www.viget.com Here I describe an approach for defining new information architectures for large organizational websites managed by many stakeholder groups. Broadly speaking, there are four general phases to the approach: Auditing. Begin by immersing yourself in existing content and encourage stakeholders to adopt a critical, audience-minded perspective of their content. Diagramming. Work with stakeholders to develop new conceptual categories that better serve audiences and organizational direction. Elaborating. Think through content in detail and test new categories against specific instances and edge cases. Producing. Prepare content teams for production using a shared database of new sitemap pages and editorial considerations that you’ve developed incrementally. Half of design is facilitation The Ladder of AbstractionA Pattern Language decisionsorganizationpatternsanalytics
Design System as Style Manual With Web Characteristics An Article by Dorian Taylor doriantaylor.com In my opinion, what makes a designer competent is precisely their ability to credibly justify their conclusions. If you can’t do this as a designer—no matter how successful your results are—then neither I nor anybody else can tell if you aren’t just picking things at random. What I am proposing, then, is no less than to make a designer’s entire line of reasoning a matter of permanent record. On the surface is the familiar set of prescriptions, components, examples and tutorials, like you would expect out of any such artifact. Attached to every element, though, is a little button that says Why? You click it, and it tells you. The proximate explanation will probably not be very satisfying, so you click on the next Why? until you get to the end, at which point you are either satisfied with the explanation, or you aren’t. The Design of Design decisionsdesignsystemsstyle
A Search for Structure A Book by Cyril Stanley Smith mitpress.mit.edu ApologiaGrain Shapes and Other Metallurgical Applications of TopologyStructure, Substructure, and SuperstructureThe Interpretation of Microstructures of Metallic ArtifactsMatter versus Materials: A Historical View+18 More Results of a search makingmaterialcraftstyle
Apologia A Chapter If the features of many are comparedPebbles on the beachHalf-formed perceptionInterdisciplinary
Grain Shapes and Other Metallurgical Applications of Topology An Essay The boundary can tell much about what is inside topologymetal
Structure, Substructure, and Superstructure An Essay The monotonous perfectionOn beauty bareIn a mass of large bubblesThe role of history in structuresA kind of moiré pattern+1 More
The Interpretation of Microstructures of Metallic Artifacts An Essay The meaning of objectsSomething akin to styleFrom the head of JoveThe objects themselves speak loudlyThe way it has been made+1 More
Matter versus Materials: A Historical View An Essay Atoms and aggregatesAesthetically motivated curiosityWhose eyes had seen and whose fingers had feltThe alchemists in their mixingsA holograph of itself+3 More
Iconography It is understandable that those students who must work from reproductions of works of art are usually more interested in iconography than in the more subtle questions of technique and quality, but it is regrettable that technical ignorance should so frequently prevent art historians from considering the whole experience of the artist. artexperiencetechnique
Understanding technique Technique is an essential aspect of any work of art from a trivial trinket to the greatest painting, and some specialized study of it is essential to full appreciation. Though museum labels and catalogs refer to materials and processes — “bronze,” “fresco,” “parcel gilt,” “tempera,” “lacquer on wood,” and so on — they usually display only superficial attention to the essential details of the artist’s technique. technique
Bells Most Japanese bells when hung still have on them one or more rough lines obviously arising in horizontal mold joints. These lines are not removed in fettling the bell, and they seem to be regarded not as defects but rather as a reminder of the reality of the founder’s interaction with his materials. One is reminded of the ceramics that are most treasured in Japan which usually have some unexpected tool marks or irregularity resulting from a kiln mishap. Chapel of St. Ignatius, Seattle, 1995–7 flawswabi-sabi
Nearer to the surface If in the following I overemphasize the Orient, this is simply because in the Far East the properties of materials are a little nearer to the surface, a little more consciously a part of what the artist is trying to show. The naturalistic aspects of Oriental philosophy encourage a sensitivity to the quality of materials — or is it the inverse, that an early enjoyment of stone, wood, clay, and fiber gave rise to the philosopher’s perception of the soul in all natural things comparable to man himself? Westerners tend to override materials, usually in ignorance, but sometimes proudly as a tour de force. materialsoul
The drop press The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form. [In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top. When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading. Separation of surface and structure
Big things and little things It is hardly possible that human beings could have decided logically that they needed to develop language in order to communicate with each other before they had experienced pleasurable interactive communal activities like singing and dancing. Aesthetic curiosity has been central to both genetic and cultural evolution. All big things grow from little things, but new little things will be destroyed by their environment unless they are cherished for reasons more like love than purpose. aestheticsevolutionwords
What's the difference? I well remember an occasion in 1962 when in a remote Iranian village I asked a blacksmith famous for his superior penknives to tell me the difference between iron and steel. “What’s the difference?” he replied. “What’s the difference between an oak tree and a willow — they have different natures and one must adapt to them.” He did not accept the suggestion that some material absorbed from the fire’s charcoal might have something to do with it, and he would not have understood a word of any lecture I could have given him on diffusion, crystal structure, and phase transformations; yet he could make a good knife and I could not. making
The scale of human experience It is the scale of human experience, from which thought and imagination take off, and to which they must return. creativityexperience
The edifice from which they came A list of types of bricks used in the Hagia Sophia may help one to build an interesting brick wall, but it poorly suggests the great edifice from which they came. Atoms and aggregates knowledgecollections
The interplay of pattern and texture Some of the more enjoyable surfaces (for example, the grain of a fine mahogany table top or a Japanese sword) have an interplay between pattern and texture which, though two-dimensional, suggests the unseen internal three-dimensional array. texture
Resonances The resonances arising in workmanship are often very subtle. The fact that the material itself guides the tool differently in different processes of working introduces changes in the overall relationship of curvatures. The smooth curves of surfaces approaching the edge of a jade axe that come about from innumerable abrasive particles moving against a slightly yielding and mechanically unconstrained backing would seem incongruous if other surfaces or outlines were present that had come from cleavage or from the geometric motions of a machine. These could be produced easily enough, but the eye would not establish larger resonances among them. toolstechniquecraft
Fine arts and decorative arts The fine arts are conscious and essentially individual in tradition. The quantitative and economic aspects of the decorative arts, on the other hand, make them intrinsically repetitive. Because of this, their aesthetic qualities have a very intimate relationship to the technology of materials, and their design is thereby basically affected. In addition to the qualitative need for repetitive detail in design, the decorative arts have a quantitative requirement, namely the imperative of covering large areas or making large numbers of individual objects. artornament
Replication Consider also the development of mass-production methods involving the casting of molten metals. Though the finest castings were made individually by the lost-wax process, the majority of casting from the earliest days have been designed expressly to facilitate molding. As with punches and dies, most foundry processes have the characteristic that the careful work of the master designer is involved only once, whereafter replication takes over.
Reproduction The success of a mechanic’s, or a machine’s, reproduction of a thing depends on his, or its, sensitivity to whatever qualities are important, just as the skill of the designer lies in the proper appreciation of surface qualities in terms of structure and shape variation that come from the intended means of production. making
The inner nature of material The work of an artist in getting the details that he wants is greatly facilitated if he selects a material whose inner nature makes it want to take the desired shape. A state of energetic repose materialdetails
The idea grows as they work As they work, the experience of the material under the artist's fingers subtly interacts with the idea in their mind to give the finished work some quality that was rarely fully anticipated. A few artists seem to have such a feeling for their materials that the prevision needs little modification; most say that the idea grows as they work experimentally. On GreatnessThe situation talks backThe discoveries you make in the makingWhen I was 22 craftmaterialart
True artistry The best of all examples of a satisfactory art form based upon the inner nature of a metal is provided by Japanese swords. Our perception of beauty seems to involve the interaction of several patterns having origin and significance at many different levels of space, time, matter, and spirit. In the Japanese sword blade there is heterogeneity in both the macrostructure and the microstructure. The manner of forging, the heat treatment, and the final polishing operation are all uniquely Japanese techniques, and all make necessary contributions to the final quality of the blades. The shape along would be simplistic form; the forged texture of the steel without heat treatment would at best faintly echo the beauty of grained wood; the outlines of the quench-hardened zone at the edge would be sharp and uninteresting if it depended only on the control of cooling rate during quenching; and the polish would be uniform glitter if the metal were homogeneous. With true artistry all these are made to interact. beautycraft
Simple variations of the parts Symmetry, indeed, has been grossly overemphasized in both art and science: its main value is in giving meaning to its absence, dissymmetry, without which there could be no hierarchy. The eye is repulsed by complexity if no order is detected, but it can be delighted by repetition, translation, rotation, reflection, magnification, and other simple variations of the parts. geometrypatterns