industry
Dark satanic mills
And did the Countenance Divine,
Shine forth upon our clouded hills?
And was Jerusalem builded here,
Among these dark Satanic Mills?Monumental structures
These disused gas cylinders occupy a site on the outskirts of Stockholm. For the first ten years after moving to London, the view west across the train tracks was of a similar pair of monumental structures, transfigured by every sunset. One has since been dismantled to make way for the expanding national and international railway stations.
Savage, hostile, and cruel
Some may find puzzling or distasteful the parallel I am drawing between the study of nature and the study of technology. After all, nature is good and good for you, whereas everyone knows that technology is ugly, evil, and dangerous.
A few centuries ago—say, on the American western frontier—a quite different view prevailed. Nature was seen as savage, hostile, cruel. Mountains and forests were barriers, not refuges. The lights of civilization were a comforting sight. We took our charter from the book of Genesis, which grants mankind dominion over the beasts, and felt it was both our entitlement and our duty to tame the wilderness, fell the trees, plow the land, and dam the rivers.
Infrastructure: A Guide to the Industrial Landscape
A Book by Brian HayesThe Factory Photographs
A Book by David LynchI love industry. Pipes. I love fluid and smoke. I love man-made things. I like to see people hard at work, and I like to see sludge and man-made waste.
Scales of cities, scales of software
An Article by Linus the SephistAmerican cities seem like a product of industrial processes where older European cities seem like a product of human processes. This is because most American cities were built after and alongside the car and the industrial revolution – the design of cities took into account what was easily possible, and that guided the shape and scale of everything.
Software has similar analogues. There are software codebases that feel much more industrially generated than hand written, and they’re usually written in automation-rich environments fitting into frameworks and other orchestrating code.
…But despite the availability of cars, I still much prefer the scale and ambiance of European, human-scale cities, because ultimately cities are places humans must inhabit and understand. In the same way, I still much prefer the scale and ambiance of hand-written codebases even in the presence of heavy programming tooling, because ultimately codebases are places humans must inhabit.
Age of Invention
A Series by Anton HowesI’m a historian of innovation. I write mostly about the causes of Britain’s Industrial Revolution, focusing on the lives of the individual innovators who made it happen. I’m interested in everything from the exploits of sixteenth-century alchemists to the schemes of Victorian engineers. My research explores why they became innovators, and the institutions they created to promote innovation even further.
Life-friendly design
An Article by Ralph AmmerI suggest that our industrial heritage has been an important preliminary stage. The next step is to carefully examine and implement design values that nurture our joy of life. Just like our “industrial design” illustrated our industrial values, a life-friendly design could express our biophilic values.
This optimistic design approach differs from naive nostalgia or fear of extinction. There is no way back to nature but only forward to nature.
Winning by Design: The Methods of Gordon Murray
A case study of the working methods of one particularly successful designer in a highly competitive design domain - Formula One racing car design. Gordon Murray was chief designer for the very successful Brabham and McLaren racing car teams in the 1970s and 1980s. His record of success is characterised by innovative breakthroughs, often arising as sudden illuminations, based on considering the task from first principles and from a systemic viewpoint. His working methods are highly personal, and include intensive use of drawings. Personality factors and team management abilities also appear to be relevant. There are some evident similarities with some other successful, innovative designers
You need to make the step forward
Throughout a racing season there is constant, relentless pressure on the designer to keep making design improvements. But there is a limit to what can be achieved with any car design, before a jump has to be made to basically a new design, an innovation. As Gordon Murray says, ‘Given the situation and the pressure at any one time, you do get to the brick wall...I mean you're doing all these normal modifications, you know you can't go any quicker, you need to make the step forward.’
In the midst of the pressure, the fervour, the panic, he ‘used to get breakthroughs, I mean I used to get like suddenly a mental block's lifted.’
Drawing the bits
That's what is great about race car design, because even though you've had the big idea - the “light bulb” thing, which is fun - the real fun is actually taking these individual things, that nobody's every done before, and in no time at all try and think of a way of designing them. And not only think of a way of doing them, but drawing the bits, having them made and testing them.
Like designing things for the first time
Gordon Murray insists on keeping experience 'at the back of your mind, not the front' and to work from first principles when designing. For instance, in designing a component such as a suspension wishbone, 'it's all too easy - and the longer you're in design the easier it is - to say, I know all about wishbones, this is how it's going to look because that's what wishbones look like.' But if you want to make a step forward, if you're looking for ways of making it much better and much lighter, than you have to go right back to load path analysis. It is like designing things for the first time, rather than the nth time.
Wonder Plots
Working from first principles, and working in a highly organized way seem to come naturally to him, but his personal design process is much less structured than the results might suggest. Although he can tightly organize his team and run a complex racing organisation, his personal ways of designing are relatively unstructured, based on annotated, thumb-nail sketches. ‘I don't sit down and say, OK, now I've had the idea, let's see, this is a solution, these are the different ways to go, if I do this, and do that; I do lots of scribbles just to save it, before I forget.’
Gordon’s design process is based on starting with a quick sketch of a whole idea, which is then developed through many different refinements. ‘I do a quick sketch of the whole idea, and then if there's one bit that looks good, instead of rubbing other bits out, I'd put that bit to one side; I'd do it again and expand on the good bit, and drop out the bad bit, and keep doing it, doing it; and end up with all these sketches, and eventually you end up throwing ninety percent of these away.’ He also talks to himself - or rather, writes notes to himself on the sketches; notes such as ‘rubbish’, ‘too heavy’ or ‘move it this way 30mm.’ Eventually he gets to the stage of more formal, orthographic drawings, but still drawing annotated plans, elevations and sections all together, ‘Until at the end of the day the guys at Brabham used to call them “Wonder Plots”, because they used to say “It's a wonder anybody could see what was on them”!’
I never have engineers that aren't designers
Although Gordon Murray carried immense personal responsibility for the design work of his racing cars, inevitably it involved a lot of teamwork. Clearly he has been successful in inspiring others to work with him. He likes to involve team members in the design problems, and for that reason prefers to recruit all-rounders to his team; ‘I never have engineers that aren't designers.’
The problem with CAD
He also likes to work collectively, standing around a drawing board discussing problems and trying ideas.
For this kind of teamwork, and especially for conceptual design work, he finds computer aided design systems too restrictive. For the McLaren F1 super-car, he installed a five-metre long drawing board in the design office, so that the car could be drawn full size. ‘The problem with CAD for this sort of stuff is that you can never have a full-size drawing, unless you do a print, and by the time you do a print it's out of date in the concept stage.’ He also does not like the one-person emphasis of CAD screens; ‘You can only ever talk to one person at once - you stand behind and look over somebody's shoulder, which is not very good for a boss-designer relationship anyway, to have somebody standing behind you is never a good thing. To look over somebody's shoulder at a tiny little screen, it's just wrong, it's totally wrong.’
(On the other hand, he fully acknowledges that tasks like a complex suspension plot to determine the wheel envelope are ideal for CAD.)
Drawing as a means of thinking
Two-dimensional plans or sections can be seen with sketches and more diagrammatic marks all on the same piece of paper in what appears a confusing jumble.’ These sound like Gordon’s ‘wonder plots’. The architects also use their drawings as a means of thinking ‘aloud’, or ‘talking to themselves’, as Gordon put it. For example, Lawson reports the architect Richard MacCormac as saying, ‘I use drawing as a process of criticism and discovery’; and the engineer-architect Santiago Calatrava as saying, ‘To start with you see the thing in your mind and it doesn’t exist on paper and then you start making simple sketches and organizing things and then you start doing layer after layer.... it is very much a dialogue.’
The common elements in these similar descriptions are the use of drawing not only as a means of externalising cognitive images but also of actively ‘thinking by drawing’, and of responding, layer after layer and view after view, to the design as it emerges in the drawings. These observations also confirm Schön’s observation of designing as a ‘reflective conversation’ between the designer and the emerging design. It is the reliance on drawing, and the preference for the immediacy of the interaction and feedback that manual drawing gives, that makes the architects, like Gordon Murray, unenthusiastic about CAD as a conceptual design tool.
A new gestalt
The innovator has a systems mind, one that sees things in terms of how they relate to each other in producing a result, a new gestalt that to some degree changes the world.
Intense activity, then relaxation
The working style is based on periods of intense activity, coupled with other periods of more relaxed, reflective contemplation. This working style may not be a reflection of a particular personality trait, but a necessary aspect of creative work, which requires alternating intense effort with relaxation.
Strategic, not tactical
The working methods of the innovative designer are, for the most part, not systematic; there is little or no evidence of the use of systematic methods of creative thinking, for example. The innovative designer seems to be too involved with the urgent necessity of problem solving to want, or to need, to stand back and consider their working methods. Their design approach is strategic, not tactical.
Drawing for parallel design thinking
An important feature of their strategy is parallel working - keeping design activity going at many levels simultaneously. The best cognitive aid for supporting and maintaining parallel design thinking is drawing. Drawing with the conventional tools of paper and pencil gives the flexibility to shift levels of detail instantaneously; allows partial, different views at different levels of detail to be developed side by side, or above and below and overlapping; keeps records of previous views, ideas and notes that can be accessed relatively quickly and inserted into the current frame of reference; permits and encourages the simultaneous, non-hierarchical participation of co-workers, using a common representation.
The drawing of partial solutions or representations also aids the designer’s thinking processes, and provides some ‘talk-back’. As well as drawing, innovative designers frequently like to undertake practical work related to the design solution, such as building models or mock-ups, or participating in construction.
A small team of committed coworkers
The innovative designer also likes, perhaps needs, to work with a small team of committed co-workers who share the same passions and dedication.