feedback
Control and Correlation
The fastest way to learn something is to do something
An Article by David R. MacIverSuppose you have a problem to solve. What do you do?
Well, you sit down and think real hard, and after extensive and careful planning you try the well thought out and rigorous solution that you have thought up. Right?
No, wrong! Bad.
The correct thing to do when you have a problem is:
- Think for a short amount of time.
- Make sure it is safe to try things.
- Try something you think will work.
- Observe the result. If you succeeded, yay you solved the problem! If it didn't work, think about what that means for the nature of the problem and try again.
How can we develop transformative tools for thought?
A Research Paper by Andy Matuschak & Michael NielsenConventional tech industry product practice will not produce deep enough subject matter insights to create transformative tools for thought.
...The aspiration is for any team serious about making transformative tools for thought. It’s to create a culture that combines the best parts of modern product practice with the best parts of the (very different) modern research culture. You need the insight-through-making loop to operate, whereby deep, original insights about the subject feed back to change and improve the system, and changes to the system result in deep, original insights about the subject.
When Customer Journeys Don’t Work: Arcs, Loops, & Terrain
An Article by Stephen P. AndersonThinking [in terms of loops and arcs] allows us to let go of a specific journey or sequence, and imagine dozens of scenarios and possible sequences in which these skills can be learned. This doesn’t mean there aren’t more fundamental skills that other skills build upon, but we can let go the tyranny of how, precisely, a person will move through a system. We’re free to zoom in and obsess on these loops, which does two things for us:
- Approach the design of a system as the design of these as small but significant moments of learning.
- Consider the many ways these loops might be sequenced, with the exact order being less important.
Asynchronous Design Critique: Getting Feedback
An Article by Erin CasaliGetting feedback can be thought of as a form of design research. In the same way that we wouldn’t do any research without the right questions to get the insights that we need, the best way to ask for feedback is also to craft sharp questions.
Kigumi House
A sense reflected in the plans
When a space resonates with our humanity, when it feels really pleasant or splendid and beautiful—when you place yourself in such an environment, I've always believed that people will be drawn in. So I guess you could say it's this sense that I try to reflect in the plans; I believe that this will lead in the right direction, to an honest lifestyle.
I'm reminded of their faces
Mrs. Shimada is very cheerful, and Mr. Shimada is very intelligent; he is able to perceive things objectively, and discern what is precious. I get the sense they live critically, evaluating what is important. Keeping these characteristics in mind, I think about what kind of plan should be provided, in what proportions, and in what kind of house—to best suit these people. I'm constantly reminded of their faces as I prepare the plans. I'm always thinking about human happiness. If it doesn't make you happy, I don't think it's worth building.
Maybe I should sharpen soon
I've been doing this for decades, so I've found tools that can't get any better. Tools by a good blacksmith cut well for the entire day, as well as the next; occasionally, even on the third day. I'll think, maybe I should sharpen soon, even though it's still cutting okay.
So that's what it's like — it's all about how good your tools are.
What's suitable for each unique condition
What of machines and prefabrication? How do they compare?
Well, the machine has its limits. We, using handcrafted methods, do things that machines cannot do. Of course, it's not fast like a machine. And in complicated areas like here, things wouldn't go the same using a machine as it would by hand.
We use numerous variations of all these connecting and splicing joints. Using a machine, [the wood joints] can all be made uniform, but really, we need to consider whether that's a good thing. It's better to make each mechanism and joint by considering what's suitable for each unique condition.
The structure becomes more solid
I suspect that these tools and these shapes each have their own era. And, well—recently, mass production has made fabrication more practical by using machines, and producing joints that are even easier and faster. Currently, [composite joints] are the most practical—economically as well. That's probably how it became so simple.
The precision [of a prefabricated joint] is by no means bad; a prefabricated joint is more precise than one made by hand with poor skills. Of course, with craftsmen, some are good; others, not so good. It's fine if only people with excellent skills make these joints and build houses; but occasionally, you'll get someone who doesn't. In this case, there's a possibility that prefabrication will provide a more uniform, better outcome.
With prefabrication, they don't really have as much variety in types of joints. Most splicing joints are kama-tsugi, and most connecting joints are ari of a dovetail type; it's even all the same dovetail. In comparison, we use roughly ten times that in variety—perhaps more than ten times.
You have something that is fast, easy, and cheap...
Tōru Abo: Yes, the question is which is better in comparison. I mean, there's no point having a joint made without precision. If you can't chisel with a certain degree of accuracy, there's no point cutting by hand. We often say, "Work accurately and precisely." It's labor-intensive and costs some money, but it's overwhelmingly stronger. The structure becomes more solid.
Kanawa-tsugi
The kanawa-tsugi allows for easy replacements, without having to raise the building a great deal. However, these days buildings are demolished in less than 30 or so years, so we live in an era where such measures aren't necessary. Because we're living in an era where you demolish the house before things are replaced, we don't have to do this. But in doing so, the two wood members fit together smoothly; the fit becomes incredibly good. This splicing joint, it's surprisingly rigid once assembled; so, even in an era where we have foundations like these, we still use the kanawa-tsugi.
Completing work properly in unseen areas
If you consider the inheritance of skills, we can keep this heritage by having young people do the work properly, as they did in the past. If you don't do this, or you become too practical, you'd only make simple things. It's very low tech, this inheritance of skills—using carpentry tools to do manual work. We deliberately put effort into these things, completing work properly in unseen areas.
Architecture equals structure
Architecture equals structure. Design is also important, but structure is the basis of architecture.
By taking the good aspects of both traditional and conventional construction methods, we assemble it securely...So the reason we lay out the marking lines, and carve by hand, is to utilize the good aspects of wood framing from the past when building contemporary wood-framed structures.