minimalism
Less, but better
Raw size isn't enough
Omit needless words
Dieter Rams: As Little Design as Possible
Morioka Shoten
Minimum
A Book by John PawsonAdd Less
An Article by Cassidy WilliamsA few people have asked me what I did to make this [website] so fast.
The answer is: nothing.
I just didn't add anything to make it slow.I kept it simple.
The pages are pre-rendered.
The CSS is inlined.
I didn't add unnecessary javascript.
The work was done before you got there.Your websites start fast until you add too much to make them slow. Do you need any framework at all? Could you do what you want natively in the browser? Would doing it without a framework at all make your site lighter, or actually heavier in the long run as you create or optimize what others have already done?
Tanikawa House
A BuildingPhotos of the Tanikawa House, designed by architect Kazuo Shinohara.
Built in 1974, this summer house materializes the act of covering a piece of earth, making it an inhabitation only by means of a roof protecting the dirt soil of the ground. The house lies on a slope in a middle of a wood and grows through an exposed timber frame structure which supports a large pitched roof. Under the roof, a minimal section of the house located on a side hosts some specific living functions concentrated on two floors: a bathroom, a kitchen, a bedroom and a staircase. This section lies in parallel to the main “earth room” (or “summer room”) and overlooks it.
Do We Need This?
An ArticleUltimately this redesign has been a study in less, trying to dig deep and find out what it is I actually want for this site. A momentary visual “wow”, or quality content that is worthy of your attention? I decided on the latter, with less visual clutter it is far harder to try obscure bad or shallow writing behind a veneer of pretty images and effects. Posts may take longer to write but I hope this new design will push towards content that is worthy of your time.
Kigumi House
A sense reflected in the plans
When a space resonates with our humanity, when it feels really pleasant or splendid and beautiful—when you place yourself in such an environment, I've always believed that people will be drawn in. So I guess you could say it's this sense that I try to reflect in the plans; I believe that this will lead in the right direction, to an honest lifestyle.
I'm reminded of their faces
Mrs. Shimada is very cheerful, and Mr. Shimada is very intelligent; he is able to perceive things objectively, and discern what is precious. I get the sense they live critically, evaluating what is important. Keeping these characteristics in mind, I think about what kind of plan should be provided, in what proportions, and in what kind of house—to best suit these people. I'm constantly reminded of their faces as I prepare the plans. I'm always thinking about human happiness. If it doesn't make you happy, I don't think it's worth building.
Maybe I should sharpen soon
I've been doing this for decades, so I've found tools that can't get any better. Tools by a good blacksmith cut well for the entire day, as well as the next; occasionally, even on the third day. I'll think, maybe I should sharpen soon, even though it's still cutting okay.
So that's what it's like — it's all about how good your tools are.
What's suitable for each unique condition
What of machines and prefabrication? How do they compare?
Well, the machine has its limits. We, using handcrafted methods, do things that machines cannot do. Of course, it's not fast like a machine. And in complicated areas like here, things wouldn't go the same using a machine as it would by hand.
We use numerous variations of all these connecting and splicing joints. Using a machine, [the wood joints] can all be made uniform, but really, we need to consider whether that's a good thing. It's better to make each mechanism and joint by considering what's suitable for each unique condition.
The structure becomes more solid
I suspect that these tools and these shapes each have their own era. And, well—recently, mass production has made fabrication more practical by using machines, and producing joints that are even easier and faster. Currently, [composite joints] are the most practical—economically as well. That's probably how it became so simple.
The precision [of a prefabricated joint] is by no means bad; a prefabricated joint is more precise than one made by hand with poor skills. Of course, with craftsmen, some are good; others, not so good. It's fine if only people with excellent skills make these joints and build houses; but occasionally, you'll get someone who doesn't. In this case, there's a possibility that prefabrication will provide a more uniform, better outcome.
With prefabrication, they don't really have as much variety in types of joints. Most splicing joints are kama-tsugi, and most connecting joints are ari of a dovetail type; it's even all the same dovetail. In comparison, we use roughly ten times that in variety—perhaps more than ten times.
You have something that is fast, easy, and cheap...
Tōru Abo: Yes, the question is which is better in comparison. I mean, there's no point having a joint made without precision. If you can't chisel with a certain degree of accuracy, there's no point cutting by hand. We often say, "Work accurately and precisely." It's labor-intensive and costs some money, but it's overwhelmingly stronger. The structure becomes more solid.
Kanawa-tsugi
The kanawa-tsugi allows for easy replacements, without having to raise the building a great deal. However, these days buildings are demolished in less than 30 or so years, so we live in an era where such measures aren't necessary. Because we're living in an era where you demolish the house before things are replaced, we don't have to do this. But in doing so, the two wood members fit together smoothly; the fit becomes incredibly good. This splicing joint, it's surprisingly rigid once assembled; so, even in an era where we have foundations like these, we still use the kanawa-tsugi.
Completing work properly in unseen areas
If you consider the inheritance of skills, we can keep this heritage by having young people do the work properly, as they did in the past. If you don't do this, or you become too practical, you'd only make simple things. It's very low tech, this inheritance of skills—using carpentry tools to do manual work. We deliberately put effort into these things, completing work properly in unseen areas.
Architecture equals structure
Architecture equals structure. Design is also important, but structure is the basis of architecture.
By taking the good aspects of both traditional and conventional construction methods, we assemble it securely...So the reason we lay out the marking lines, and carve by hand, is to utilize the good aspects of wood framing from the past when building contemporary wood-framed structures.