Novelty & Newness
The subtlest slightest kinds of differences
Having quite lost sight of the principle
Ending is better than mending
“We always throw away old clothes. Ending is better than mending, ending is better than mending, ending is better…”
A fresh focus of power
The demand for “originality”—with the implication that the reminiscence of other writers is a sin against originality and a defect in the work—is a recent one and would have seemed quite ludicrous to poets of the Augustan Age, or of Shakespeare’s time. The traditional view is that each new work should be a fresh focus of power through which former streams of beauty, emotion, and reflection are directed. This view is adopted, and perhaps carried to excess, by writers like T. S. Eliot, some of whose poems are a close web of quotations and adaptations, chosen for their associative value, or like James Joyce, who makes great use of the associative value of sounds and syllables.
Over-imagination
An architect intent on being different may in the end prove as troubling as an over-imaginative pilot or doctor. However important originality may be in some fields, restraint and adherence to procedure emerge as the more significant virtues in a great many others.
We rarely wish to be surprised by novelty as we round street corners. We require consistency in our buildings, for we are ourselves frequently close to disorientation and frenzy.
The word invents itself
Posits certain neologisms as arising from their own cultural necessity—his words, I believe. Yes, he said. When the kind of experience that you're getting a man-sized taste of becomes possible, the word invents itself.
The Innovation Funnel
A Comic by Tom FishburneMost organizations use some version of an innovation funnel to bring ideas to life. It starts with lots of ideas at the front end and then launches whatever survives all the way to the back end.
Yet this Darwinian process of bringing ideas to life doesn’t necessarily lead to survival of the fittest ideas. If we’re not careful, the innovation funnel leads to survival of the safest ideas.
Organizations are good at spotting risks. In an effort to improve success rates, organizations tend to put sharper teeth in the funnel.
As ideas run the organizational gauntlet, they can get pruned, sheared, shaped, and watered down beyond recognition. On the way, they can lose the essence of the idea. They may lose their point of difference and reason for being.
Stepping stones in possibility space
An Article by Gordon BranderIf we try to cross this lake by following only the stepping stones that lead toward our objective, we’ll soon get stuck. But what if we let go of our objectives? What if we focused on trying to find new stepping stones instead? This is novelty search. Instead of looking for something specific, you look for something new.
Novelty search isn’t just random, it’s chance plus memory. Together, these ingredients do something interesting.
...Stepping stones are also combinatorial. Each new stepping stone we discover expands our potential to find even more stepping stones. Collecting stepping stones is a luck maximization algorithm. By collecting and combining stepping stones, we might arrive at our destination by accident, or somewhere more interesting!
Don’t Play It Like the Flute
An Article by Matthias OttDon’t play it like the flute. Play it as if it was the wind whistling through the desert dunes.
No matter what you love to create, there is something to be learned from the way Hans Zimmer approached the Dune score. We are all striving to create work that is novel, innovative, memorable, and inspiring. To get there, however, we tend to focus on getting things right, on avoiding mistakes, on “being professional”. Yes, it is important to have the commitment, dedication, and attention to detail of a professional. But being right? That will only take you so far. What is much more important is to approach the problem in front of you with curiosity and an open mind. With an urge to explore what can be found beyond the ordinary, beyond the right way of doing things. If you want to create something that nobody has come up with yet, it is important that you try out all the crazy ideas others are afraid to try, that you build prototypes, improvise, and freely play with the materials and the technologies you have at hand.
The Web is Industrialized and I Helped Industrialize It
An Article by Dave RupertIn our cultural obsession with billionaire entrepreneurs we laud new features more than the maintenance and incrementalism work of making old features better and more accessible. Maintenance looks like red minus signs in the spreadsheet. New features look like green plus signs. New features look better on our LinkedIn profiles. New features have that pizzazz, baby.
When gardening, the building of planters and initial planting is a very short process. The majority of your time is spent nurturing and monitoring growth. I personally feel the struggle between maintainer work and new shiny feature work. I enjoy that new feature smell but I know that my day-to-day is more like a janitor on a boat mopping up someone else’s barf. In terms of metaphors, the gardening metaphor is certainly better, and it acknowledges that design and development still tend to be more creative endeavors.
A Search for Structure
Apologia
A ChapterGrain Shapes and Other Metallurgical Applications of Topology
An EssayStructure, Substructure, and Superstructure
An EssayThe Interpretation of Microstructures of Metallic Artifacts
An EssayMatter versus Materials: A Historical View
An EssayIconography
It is understandable that those students who must work from reproductions of works of art are usually more interested in iconography than in the more subtle questions of technique and quality, but it is regrettable that technical ignorance should so frequently prevent art historians from considering the whole experience of the artist.
Understanding technique
Technique is an essential aspect of any work of art from a trivial trinket to the greatest painting, and some specialized study of it is essential to full appreciation.
Though museum labels and catalogs refer to materials and processes — “bronze,” “fresco,” “parcel gilt,” “tempera,” “lacquer on wood,” and so on — they usually display only superficial attention to the essential details of the artist’s technique.
Bells
Most Japanese bells when hung still have on them one or more rough lines obviously arising in horizontal mold joints. These lines are not removed in fettling the bell, and they seem to be regarded not as defects but rather as a reminder of the reality of the founder’s interaction with his materials. One is reminded of the ceramics that are most treasured in Japan which usually have some unexpected tool marks or irregularity resulting from a kiln mishap.
Nearer to the surface
If in the following I overemphasize the Orient, this is simply because in the Far East the properties of materials are a little nearer to the surface, a little more consciously a part of what the artist is trying to show. The naturalistic aspects of Oriental philosophy encourage a sensitivity to the quality of materials — or is it the inverse, that an early enjoyment of stone, wood, clay, and fiber gave rise to the philosopher’s perception of the soul in all natural things comparable to man himself? Westerners tend to override materials, usually in ignorance, but sometimes proudly as a tour de force.
The drop press
The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form.
[In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top.
When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading.
Big things and little things
It is hardly possible that human beings could have decided logically that they needed to develop language in order to communicate with each other before they had experienced pleasurable interactive communal activities like singing and dancing. Aesthetic curiosity has been central to both genetic and cultural evolution.
All big things grow from little things, but new little things will be destroyed by their environment unless they are cherished for reasons more like love than purpose.
What's the difference?
I well remember an occasion in 1962 when in a remote Iranian village I asked a blacksmith famous for his superior penknives to tell me the difference between iron and steel. “What’s the difference?” he replied. “What’s the difference between an oak tree and a willow — they have different natures and one must adapt to them.” He did not accept the suggestion that some material absorbed from the fire’s charcoal might have something to do with it, and he would not have understood a word of any lecture I could have given him on diffusion, crystal structure, and phase transformations; yet he could make a good knife and I could not.
The scale of human experience
It is the scale of human experience, from which thought and imagination take off, and to which they must return.
The edifice from which they came
A list of types of bricks used in the Hagia Sophia may help one to build an interesting brick wall, but it poorly suggests the great edifice from which they came.
The interplay of pattern and texture
Some of the more enjoyable surfaces (for example, the grain of a fine mahogany table top or a Japanese sword) have an interplay between pattern and texture which, though two-dimensional, suggests the unseen internal three-dimensional array.
Resonances
The resonances arising in workmanship are often very subtle. The fact that the material itself guides the tool differently in different processes of working introduces changes in the overall relationship of curvatures. The smooth curves of surfaces approaching the edge of a jade axe that come about from innumerable abrasive particles moving against a slightly yielding and mechanically unconstrained backing would seem incongruous if other surfaces or outlines were present that had come from cleavage or from the geometric motions of a machine. These could be produced easily enough, but the eye would not establish larger resonances among them.
Fine arts and decorative arts
The fine arts are conscious and essentially individual in tradition.
The quantitative and economic aspects of the decorative arts, on the other hand, make them intrinsically repetitive. Because of this, their aesthetic qualities have a very intimate relationship to the technology of materials, and their design is thereby basically affected.
In addition to the qualitative need for repetitive detail in design, the decorative arts have a quantitative requirement, namely the imperative of covering large areas or making large numbers of individual objects.
Replication
Consider also the development of mass-production methods involving the casting of molten metals. Though the finest castings were made individually by the lost-wax process, the majority of casting from the earliest days have been designed expressly to facilitate molding. As with punches and dies, most foundry processes have the characteristic that the careful work of the master designer is involved only once, whereafter replication takes over.
Reproduction
The success of a mechanic’s, or a machine’s, reproduction of a thing depends on his, or its, sensitivity to whatever qualities are important, just as the skill of the designer lies in the proper appreciation of surface qualities in terms of structure and shape variation that come from the intended means of production.
The inner nature of material
The work of an artist in getting the details that he wants is greatly facilitated if he selects a material whose inner nature makes it want to take the desired shape.
The idea grows as they work
As they work, the experience of the material under the artist's fingers subtly interacts with the idea in their mind to give the finished work some quality that was rarely fully anticipated. A few artists seem to have such a feeling for their materials that the prevision needs little modification; most say that the idea grows as they work experimentally.
True artistry
The best of all examples of a satisfactory art form based upon the inner nature of a metal is provided by Japanese swords.
Our perception of beauty seems to involve the interaction of several patterns having origin and significance at many different levels of space, time, matter, and spirit. In the Japanese sword blade there is heterogeneity in both the macrostructure and the microstructure. The manner of forging, the heat treatment, and the final polishing operation are all uniquely Japanese techniques, and all make necessary contributions to the final quality of the blades. The shape along would be simplistic form; the forged texture of the steel without heat treatment would at best faintly echo the beauty of grained wood; the outlines of the quench-hardened zone at the edge would be sharp and uninteresting if it depended only on the control of cooling rate during quenching; and the polish would be uniform glitter if the metal were homogeneous. With true artistry all these are made to interact.
Simple variations of the parts
Symmetry, indeed, has been grossly overemphasized in both art and science: its main value is in giving meaning to its absence, dissymmetry, without which there could be no hierarchy.
The eye is repulsed by complexity if no order is detected, but it can be delighted by repetition, translation, rotation, reflection, magnification, and other simple variations of the parts.