The End
Cherry blossoms
Carrying a corpse around
It leaves no sign of its past self behind
He only who has lived with the beautiful
Litany Against Fear
Each ruler commissioned his own garden
Click
When life is over
That anything in this world should be inevitable
Has it begun to sprout?
The smallness of human life
Into the dampness of a grave
He had the sensation of stepping into the dampness of a grave, and it was not much better because he had always known that the grave was there and waiting for him.
Always allow them an escape route
When you surround the enemy
Always allow them an escape route
They must see that there is
An alternative to death.70. Grave Sites
Problem
No people who turn their backs on death can be alive. The presence of the dead among the living will be a daily fact in any society which encourages its people to live.
Solution
Never build massive cemeteries. Instead, allocate pieces of land throughout the community as grave sites—corners of parks, sections of paths, gardens, beside gateways—where memorials to people who have died can be ritually placed with inscriptions and mementos which celebrate their live. Give each grave site an edge, a path, and a quiet corner where people can sit. By custom, this is hallowed ground.
What if I say I shall not wait?
What if I say I shall not wait?
What if I burst the fleshly gate
And pass, escaped, to thee?The morning after death
The bustle in a house
The morning after death
Is solemnest of industries
Enacted upon earth,—The sweeping up the heart,
And putting love away
We shall not want to use again
Until eternity.Because I could not stop for Death
Because I could not stop for Death,
He kindly stopped for me;
The carriage held but just ourselves
And Immortality.Not as a star
But I’m warning you,
this is my last existence.
Not as a swallow, not as a maple,
not as a cat-tail and not as a star.I know all about entropy
Adell: I know as much as you do.
Lupov: Then you know everything's got to run down someday.
Pinkas Synagogue
Names of the Holocaust victims from Czech lands on the synagogue's inner wall.
During reconstruction in 1950–1954, the original floor-level as well as the appearance of the synagogue were restored. In following five years, the walls of the synagogue were covered with names of about 78,000 Bohemian and Moravian Jewish victims of Shoah. The names are arranged by communities where the victims came from and complemented with their birth and death date.
But one thought
All earth was but one thought—and that was death.
In the image of their city
They say that every time they go below they find something changed in the lower Eusapia; the dead make innovations in their city; not many, but surely the fruit of sober reflection, not passing whims. From one year to the next, they say, the Eusapia of the dead becomes unrecognizable. And the living, to keep up with them, also want to do everything that the hooded brothers tell them about the novelties of the dead. So the Eusapia of the living has taken to copying its underground copy.
They say that this has not just now begun to happen: actually it was the dead who built the upper Eusapia, in the image of their city. They say that in the twin cities there is no longer any way of knowing who is alive and who is dead.
Fear of death
He thought that fear of death was perhaps the root of all art.
The alphabet
Yet he would not die lying down; he would find some crag of rock, and there, his eyes fixed on the storm, trying to the end to pierce the darkness, he would die standing. He would never reach R.
Making Death a Victory
Like thee, Man is in part divine,
A troubled stream from a pure source;
And Man in portions can foresee
His own funereal destiny;
His wretchedness, and his resistance,
And his sad unallied existence:
To which his Spirit may oppose
Itself—and equal to all woes,
And a firm will, and a deep sense,
Which even in torture can descry
Its own concenter'd recompense,
Triumphant where it dares defy,
And making Death a Victory.It is going to pass
The character of nature can’t arise without the presence and the consciousness of death.
When we make our own attempt to create nature in the world around us, and succeed, we cannot escape the fact that we are going to die. This quality, when it is reached, in human things, is always sad; it makes us sad; and we can even say that any place where a man tries to make the quality, and be like nature, cannot be true, unless we can feel the slight presence of this haunting sadness there, because we know at the same time we enjoy it, that it is going to pass.
An entrance, an exit
Empty-handed I entered the world
Barefoot I leave it
My coming, my going
Two simple happenings
That got entangledTraces
If I leave
no trace behind
in this fleeting world
what then could you
reproach?Japanese Death Poems
A Book by Yoel HoffmanPrometheus
A Poem by Lord ByronDarkness
A Poem by Lord ByronGraceful Exits: How Great Beings Die
A Book by Sushila BlackmanI've designed it that way
A Quote by Townes Van ZandtI don't envision a very long life for myself.
Like, I think my life will run out before my work does, you know?
I've designed it that way.Phantom Regret by Jim
A Poem by Jim Carrey & The WeekndAnd if your broken heart's heavy when you step on the scale
You'll be lighter than air when they pull back the veil
Consider the flowers, they don't try to look right
They just open their petals and turn to the lightEpitaph to a Dog
A Poem by Lord ByronYe! who behold perchance this simple urn,
Pass on, it honours none you wish to mourn.
To mark a friend's remains these stones arise;
I never knew but one — and here he lies.Micromorts
A Definition by Matt WebbThere’s a standard way to understand the relative danger of any activity. A micromort is "a unit of risk defined as one-in-a-million chance of death." For example:
- skydiving is 8 micromorts per jump
- running a marathon: 26 micromorts
- 1 micromort: walking 17 miles, or driving 230 miles
Generally being alive averages out at 24 micromorts/day.
This place is a message
A FragmentThis place is a message... and part of a system of messages... pay attention to it!
Sending this message was important to us. We considered ourselves to be a powerful culture.
This place is not a place of honor... no highly esteemed deed is commemorated here... nothing valued is here.
What is here was dangerous and repulsive to us. This message is a warning about danger.
The danger is in a particular location... it increases towards a center... the center of danger is here... of a particular size and shape, and below us.
The danger is still present, in your time, as it was in ours.
The danger is to the body, and it can kill.
The form of the danger is an emanation of energy.
The danger is unleashed only if you substantially disturb this place physically. This place is best shunned and left uninhabited.
A Search for Structure
Apologia
A ChapterGrain Shapes and Other Metallurgical Applications of Topology
An EssayStructure, Substructure, and Superstructure
An EssayThe Interpretation of Microstructures of Metallic Artifacts
An EssayMatter versus Materials: A Historical View
An EssayIconography
It is understandable that those students who must work from reproductions of works of art are usually more interested in iconography than in the more subtle questions of technique and quality, but it is regrettable that technical ignorance should so frequently prevent art historians from considering the whole experience of the artist.
Understanding technique
Technique is an essential aspect of any work of art from a trivial trinket to the greatest painting, and some specialized study of it is essential to full appreciation.
Though museum labels and catalogs refer to materials and processes — “bronze,” “fresco,” “parcel gilt,” “tempera,” “lacquer on wood,” and so on — they usually display only superficial attention to the essential details of the artist’s technique.
Bells
Most Japanese bells when hung still have on them one or more rough lines obviously arising in horizontal mold joints. These lines are not removed in fettling the bell, and they seem to be regarded not as defects but rather as a reminder of the reality of the founder’s interaction with his materials. One is reminded of the ceramics that are most treasured in Japan which usually have some unexpected tool marks or irregularity resulting from a kiln mishap.
Nearer to the surface
If in the following I overemphasize the Orient, this is simply because in the Far East the properties of materials are a little nearer to the surface, a little more consciously a part of what the artist is trying to show. The naturalistic aspects of Oriental philosophy encourage a sensitivity to the quality of materials — or is it the inverse, that an early enjoyment of stone, wood, clay, and fiber gave rise to the philosopher’s perception of the soul in all natural things comparable to man himself? Westerners tend to override materials, usually in ignorance, but sometimes proudly as a tour de force.
The drop press
The virtue of thin sheet metal in giving the greatest glitter for a grain of gold was exploited in the earliest days of metallurgy. However, before the days of rolled sheet and drawn wire, most metal objects were made by hammering and were basically three-dimensional in form.
[In contrast] look at the simple drop press — it’s unmodulated blow striking in a single direction symbolizes much of nineteenth-century mechanized production. To make multiple stampings, stacks of very thin metal sheets were superimposed under the hammer, and the final profile with moderately high relief was gradually achieved as finished sheets were removed from the bottom and new ones added at the top.
When the drop press was used to shape large areas of thin sheet metal, the aesthetic qualities of the surface became divorced from the underlying substance, and decoration became independent of the body needed to support it. In any object there is a natural relationship between the surface and the bulk, that is, between its one-, two-, and three-dimensional aspects. The fakery involved in applying gold or silver playing on a solid copper object is quite different from the deception of an ornately stamped piece of thin sheet brass. Compare a magnificent ormolu furniture fitting or even a gilded plaster picture frame with a cheap lamp base embossed in thin sheet brass. In the former, the surface is simply and honestly applied for its optical effect alone; in the latter the fakery is fundamental for it is dimensionally misleading.
Big things and little things
It is hardly possible that human beings could have decided logically that they needed to develop language in order to communicate with each other before they had experienced pleasurable interactive communal activities like singing and dancing. Aesthetic curiosity has been central to both genetic and cultural evolution.
All big things grow from little things, but new little things will be destroyed by their environment unless they are cherished for reasons more like love than purpose.
What's the difference?
I well remember an occasion in 1962 when in a remote Iranian village I asked a blacksmith famous for his superior penknives to tell me the difference between iron and steel. “What’s the difference?” he replied. “What’s the difference between an oak tree and a willow — they have different natures and one must adapt to them.” He did not accept the suggestion that some material absorbed from the fire’s charcoal might have something to do with it, and he would not have understood a word of any lecture I could have given him on diffusion, crystal structure, and phase transformations; yet he could make a good knife and I could not.
The scale of human experience
It is the scale of human experience, from which thought and imagination take off, and to which they must return.
The edifice from which they came
A list of types of bricks used in the Hagia Sophia may help one to build an interesting brick wall, but it poorly suggests the great edifice from which they came.
The interplay of pattern and texture
Some of the more enjoyable surfaces (for example, the grain of a fine mahogany table top or a Japanese sword) have an interplay between pattern and texture which, though two-dimensional, suggests the unseen internal three-dimensional array.
Resonances
The resonances arising in workmanship are often very subtle. The fact that the material itself guides the tool differently in different processes of working introduces changes in the overall relationship of curvatures. The smooth curves of surfaces approaching the edge of a jade axe that come about from innumerable abrasive particles moving against a slightly yielding and mechanically unconstrained backing would seem incongruous if other surfaces or outlines were present that had come from cleavage or from the geometric motions of a machine. These could be produced easily enough, but the eye would not establish larger resonances among them.
Fine arts and decorative arts
The fine arts are conscious and essentially individual in tradition.
The quantitative and economic aspects of the decorative arts, on the other hand, make them intrinsically repetitive. Because of this, their aesthetic qualities have a very intimate relationship to the technology of materials, and their design is thereby basically affected.
In addition to the qualitative need for repetitive detail in design, the decorative arts have a quantitative requirement, namely the imperative of covering large areas or making large numbers of individual objects.
Replication
Consider also the development of mass-production methods involving the casting of molten metals. Though the finest castings were made individually by the lost-wax process, the majority of casting from the earliest days have been designed expressly to facilitate molding. As with punches and dies, most foundry processes have the characteristic that the careful work of the master designer is involved only once, whereafter replication takes over.
Reproduction
The success of a mechanic’s, or a machine’s, reproduction of a thing depends on his, or its, sensitivity to whatever qualities are important, just as the skill of the designer lies in the proper appreciation of surface qualities in terms of structure and shape variation that come from the intended means of production.
The inner nature of material
The work of an artist in getting the details that he wants is greatly facilitated if he selects a material whose inner nature makes it want to take the desired shape.
The idea grows as they work
As they work, the experience of the material under the artist's fingers subtly interacts with the idea in their mind to give the finished work some quality that was rarely fully anticipated. A few artists seem to have such a feeling for their materials that the prevision needs little modification; most say that the idea grows as they work experimentally.
True artistry
The best of all examples of a satisfactory art form based upon the inner nature of a metal is provided by Japanese swords.
Our perception of beauty seems to involve the interaction of several patterns having origin and significance at many different levels of space, time, matter, and spirit. In the Japanese sword blade there is heterogeneity in both the macrostructure and the microstructure. The manner of forging, the heat treatment, and the final polishing operation are all uniquely Japanese techniques, and all make necessary contributions to the final quality of the blades. The shape along would be simplistic form; the forged texture of the steel without heat treatment would at best faintly echo the beauty of grained wood; the outlines of the quench-hardened zone at the edge would be sharp and uninteresting if it depended only on the control of cooling rate during quenching; and the polish would be uniform glitter if the metal were homogeneous. With true artistry all these are made to interact.
Simple variations of the parts
Symmetry, indeed, has been grossly overemphasized in both art and science: its main value is in giving meaning to its absence, dissymmetry, without which there could be no hierarchy.
The eye is repulsed by complexity if no order is detected, but it can be delighted by repetition, translation, rotation, reflection, magnification, and other simple variations of the parts.