Drawing & Sketching
Kengo Kuma's sketches
Combinations and arrangements
Everything designed has an element of arbitrariness in its form. Loewy described how groups of his designers used to go about designing a new model automobile. Different groups were given different tasks, such as the front and rear of the car, and the conceptual work began, to be cut off at some predetermined time by deadlines that were imposed at the outset. After a time, there were "piles of rough sketches," and Loewy saw the design proceed as follows:
Now the important process of elimination begins. From the roughs, I select the designs that indicate germinal direction. Those that show the greatest promise are studied in detail, and these in turn are used in combination or arrangements with one another. A promising front treatment can be tried in combination with a likely side elevation sketch, etc. From this a new set of designs emerges. These are then sketched in detail. After careful analysis, they boil down to four or five.
This tactile form of doodling
Paper clips have also served as objects of more inwardly directed aggression by providing something for the fingers to twist grotesquely out of shape during phone calls, interviews, and meetings. This tactile form of doodling may consume only a fraction of the twenty billion paper clips produced each year, but it underscores the almost limitless functions to which a single form can lead.
From the desk of: Austin Kleon
How do you work?
When I get home, I have two desks in my office — one’s “analog” and one’s “digital.” The analog desk has nothing but markers, pens, pencils, paper, and newspaper. Nothing electronic is allowed on the desk — this is how I keep myself off Twitter, etc. This is where most of my work is born. The digital desk has my laptop, my monitor, my scanner, my Wacom tablet, and a MIDI keyboard controller for if I want to record any music. (Like a lot of writers, I’m a wannabe musician.) This is where I edit, publish, etc.
Drawing as a means of thinking
Two-dimensional plans or sections can be seen with sketches and more diagrammatic marks all on the same piece of paper in what appears a confusing jumble.’ These sound like Gordon’s ‘wonder plots’. The architects also use their drawings as a means of thinking ‘aloud’, or ‘talking to themselves’, as Gordon put it. For example, Lawson reports the architect Richard MacCormac as saying, ‘I use drawing as a process of criticism and discovery’; and the engineer-architect Santiago Calatrava as saying, ‘To start with you see the thing in your mind and it doesn’t exist on paper and then you start making simple sketches and organizing things and then you start doing layer after layer.... it is very much a dialogue.’
The common elements in these similar descriptions are the use of drawing not only as a means of externalising cognitive images but also of actively ‘thinking by drawing’, and of responding, layer after layer and view after view, to the design as it emerges in the drawings. These observations also confirm Schön’s observation of designing as a ‘reflective conversation’ between the designer and the emerging design. It is the reliance on drawing, and the preference for the immediacy of the interaction and feedback that manual drawing gives, that makes the architects, like Gordon Murray, unenthusiastic about CAD as a conceptual design tool.
Drawing for parallel design thinking
An important feature of their strategy is parallel working - keeping design activity going at many levels simultaneously. The best cognitive aid for supporting and maintaining parallel design thinking is drawing. Drawing with the conventional tools of paper and pencil gives the flexibility to shift levels of detail instantaneously; allows partial, different views at different levels of detail to be developed side by side, or above and below and overlapping; keeps records of previous views, ideas and notes that can be accessed relatively quickly and inserted into the current frame of reference; permits and encourages the simultaneous, non-hierarchical participation of co-workers, using a common representation.
The drawing of partial solutions or representations also aids the designer’s thinking processes, and provides some ‘talk-back’. As well as drawing, innovative designers frequently like to undertake practical work related to the design solution, such as building models or mock-ups, or participating in construction.
The preliminary sketch
Among the best woodblock prints are many that seem not to have adhered strictly to the preliminary sketch. The sketch simply indicated a general direction, and in many cases was not used at all. Or it was even improved upon in the process of carving and brought vividly to life; the woodblock qualities of the print were accentuated and highlighted.
The computer creates a distance
Computer imaging tends to flatten our magnificent, multi-sensory, simultaneous and synchronic capacities of imagination by turning the design process into a passive visual manipulation, a retinal journey. The computer creates a distance between the maker and the object, whereas drawing by hand as well as working with models put the designer in a haptic contact with the object, or space.
A mind so in flux
A mind so in flux, so sensitive to intuitive insights, could never write an academic textbook. All he could retain on paper were indications, hints, allusions, like the delicate color dots and line plays on his pictures.
Agents of thought and experiment
The act of drawing serves to remind us that hands are agents of thought and experiment. Photography has a great future, but no matter how much ancillary wizardry photography accumulates, it will not be in competition with “drawing” in the broadest sense of that term. There will always be a role for exploration by the hands, encumbered by no more than a piece of ocher or a stick of charcoal.
Its practical utility is as a manifestation of the mind struggling with the meaning of what it encounters and what it wants to explore.
What you have observed closely
Drawing requires that you pay attention to every detail—even the seemingly unimportant ones. In creating an image (no matter how skillfully), the lines and tones on the paper provide ongoing feedback as to what you have observed closely and what you have not.
Anatomical Drawings of Staircase Spaces
A Book by Tomoyuki Tanakaminimator.app
An ApplicationMinimator is a minimalist graphical editor.
All drawings are made of lines in a grid based canvas. The lines are limited to vertical and horizontal lines, and quarter circles.
Right-Angle Doodling Machine
A Game by Clive Thompson- You draw one single line. It can be as long as you like.
- To start the line, you put your pen down.
- You can make right-angle turns only, either 90 degrees or -90 degrees.
- You cannot back up. You must always move forward.
- You don’t lift your pen until you’re ready to stop. When you lift the pen, the doodle is done.
A small store
A Gallery by Kyeoung Me LeeForget the computer — here’s why you should write and design by hand
An Article by Herbert LuiIn the middle of the 2000s, the designers at creative consultancy Landor installed Adobe Photoshop on their computers and started using it. General manager Antonio Marazza tells author David Sax:
“Overnight, the quality of their designs seemed to decline. After a few months of this, Landor’s Milan office gave all their designers Moleskine notebooks, and banned the use of Photoshop during the first week’s work on a project. The idea was to let their initial ideas freely blossom on paper, without the inherent bias of the software, before transferring them to the computer later for fine-tuning. It was so successful, this policy remains in place today.”
Back to the Drawing Board
An Article by Nick JonesThe lost art of drawing for engineers and architects.
- You can almost tell which software they were designed in
- Conversational drawing
- The effort heuristic
- Tablets have caught up
Section-perspective drawing
A Fragment by Gerhard KallmannCouncil Chamber Study Looking South. Gerhard M. Kallmann.
Kallmann’s distinctive section-perspective drawing technique seen here allowed the simultaneous exploration of both interior spaces and building systems.
Pictures of Websites
An Article by Matthew StrömWhen I was a product designer, people would ask what I did for a living, and sometimes I’d answer “I draw pictures of websites.”
Sure, I could just say “I design websites.” That’s true. The end result of my work is (hopefully) that a website looks better, works better, or results in better outcomes.
But most of my day isn’t spent looking at the website, or working on the code of the website, or manipulating the website directly in some way. It’s spent in Figma or Sketch, drawing pictures of how I think the website should look and work.
Through some kind of alchemy, the pictures I draw have an impact on the finished website. But they’re not all the same.
Architectural tracings
A Gallery by Nick TrombleyA lightbulb is not an idea
An Article by Ralph AmmerWith conventional placeholders, such as words, we can describe patterns for a large number of situations. On the other hand it is easy to fool yourself (and others) with words, since you can avoid to be specific. Any business meeting can confirm this.
When you draw something you are forced to be specific — and honest.
Our illustration of an “idea” from above is unconventional in the sense that it conveys specific original thoughts of what an idea is. It adds value to the words.
And that is the catch: The drawing must be unconventional to support the conventional words. We have to make sure not to use “words in disguise”. Take a common illustration for “idea” for example, which haunts flip charts all over the world: the lightbulb.
The lightbulb image works on a purely symbolic level, it only replaces the word “idea”. This image of a household item contains no original thought about what an idea is. While symbols like these work well as international replacements for words or icons to indicate a light switch for instance, they convey no nutritional value as illustrations — they are empty.
All the buildings in New York (that I've drawn so far)
Infrastructure: A Guide to the Industrial Landscape
Savage, hostile, and cruel
Some may find puzzling or distasteful the parallel I am drawing between the study of nature and the study of technology. After all, nature is good and good for you, whereas everyone knows that technology is ugly, evil, and dangerous.
A few centuries ago—say, on the American western frontier—a quite different view prevailed. Nature was seen as savage, hostile, cruel. Mountains and forests were barriers, not refuges. The lights of civilization were a comforting sight. We took our charter from the book of Genesis, which grants mankind dominion over the beasts, and felt it was both our entitlement and our duty to tame the wilderness, fell the trees, plow the land, and dam the rivers.
Nature undisturbed
My chief aim is simply to describe and explain the technological fabric of society, not to judge whether it is good or bad, beautiful or ugly. And yet I would not argue that technology is neutral or value-free. Quite the contrary: I suggest that the signs of human presence are the only elements of the landscape that have and moral or aesthetic significance at all. In nature undisturbed, a desert is not better or worse than a forest or a swamp; there is simply no scale on which to rank such things unless it is a human scale of utility or beauty. Only when people intervene in nature is there any question of right or wrong, better or worse.
The raw materials of society
A big hole in the ground: This is where most of the raw materials of an industrial society come from. To appreciate the scale of this excavation, note that the bright blue object on a shelf near the center of the image is a Porta Potti.
The dragline
A dragline is the largest of the machines used to strip away the overburden and mine the ore layer at an open-cast mine. A bucketload for this particular dragline, one of the world's largest, is 220 cubic yards. Note the school bus, which would easily fit in the bucket.
Dark satanic steel
When poet William Blake wrote of "dark satanic mills", he couldn't have been looking at a steel mill because there were none in 1804. Nevertheless, when I visit a steel mill, Blake's phrase always comes to mind. With the heat and the pounding noise, the dust and smoke, and the red glow against the night sky, it's hard not to see these places as infernal. And yet the process of making steel also produces some of the most hauntingly beautiful images found anywhere in the world of industry.
Strength from both mass and form
Hoover Dam has the shape of an arch dam, but it is actually a hybrid structure, gathering strength from both mass and form. The dam is often ranked as one of the most exquisite of all engineered structures. It is fitted to its site so well that the gnarly canyon wall looks like an organic growth engulfing the mass of concrete.
Warmed by the afternoon sun
Textbooks on water-system engineering state that supply mains are generally installed on the north side of the street in the Northern Hemisphere and on the south side in the Southern Hemisphere, so that the sun will warm them. In both hemispheres they are supposed to be on the east side of north-south streets, on the premise that the afternoon sun is warmer than the morning sun.
Trompe l'oeil fantasies
In residential neighborhoods some sewage-pumping stations are trompe l'oeil fantasies, dressed up to look like the split-level or colonial houses that surround them. If you look closely, it's not hard to spot these disguised pumphouses: the heavy-duty power connections, the big ventilating fans, and the diesel generator in the backyard are all tip-offs. Furthermore, the windows are often fakes, with sash and shutters adorning a blank wall.
Quaker Square Inn
The modernist architect Le Corbusier was an admirer of American grain elevators, suggesting that their regularity and modularity could serve as a model for other kinds of buildings. At least one later architect took the suggestion seriously. The Quaker Square Inn in Akron, Ohio, occupies the shell of a former elevator. If you're in town for the night, you can rent a round room in one of the silos.
A metropolis for hydrocarbons
An oil refinery suggests the image of a metropolis for hydrocarbons, the pipe manifolds like expressways, the distillation towers like skyscrapers.
A haunting, syncopated music
"Rappers" on the roof of the electrostatic precipitator knock the accumulated dust free, letting it fall into the storage hopper. Each rapper is the size and shape of a baseball bat. Inside is an electromagnet that pulls a steel plunger upward, then allows it to fall again, producing a sharp knock. The rappers are energized at seemingly random intervals, producing a haunting, syncopated music. (The rhythm seemed more modern jazz than rap.)
Safety cut rope axe man
In the first nuclear reactor, constructed by Enrico Fermi in 1942 under the bleachers of the University of Chicago football stadium, the control rods were held up by a manila rope. A man with an axe was told to cut the rope if the reactor got out of hand. This "safety cut rope axe man" is supposedly the origin of the term SCRAM for an emergency shutdown procedure.
Pylons
Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers.
The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business.
Color coding
Telephone wires erupt in a multicolor cascade in a ground-level, pedestal-type splice case on a city street.
Dividing the set of 10 colors into two contrasting groups of 5 allows for exactly 25 combinations with one color from each group; thus, each pair in a bundle can be uniquely colored. A similar color code is applied to the ribbons that bind together all the pairs in a bundle, and to those of the superbundles. The result is highly festive! A specific wire might be identified as the blue-red conductor within the orange-black bundle within the brown-yellow superbundle.
The Iridium System
Several Low-Earth-Orbit (LEO) networks were proposed, but only one got off the ground: the Iridium system. The original Iridium proposal called for a "constellation" of 77 satellites, which gave the plan its name: the element iridium has atomic number 77, meaning that an iridium atom has 77 orbiting electrons. Before the satellites were launched, the constellation was scaled back to 66 active satellites, but no one wanted to change the name to Dysprosium.
Roads to nowhere
Among real-estate developers, straight lines and right angles went out of fashion sometime in the middle of the twentieth century. If you look at a town or a residential neighborhood laid out since then, you are more likely to find sinuous, serpentine roads—whether or not the topography offers any excuse for such curves. Many of these roads go nowhere: they are loops that bring you back to where you started, or they are cul-de-sacs. Making it easy to find your way through the network of streets is obviously not a high priority. This is an interesting development in urban geography: having redesigned the city to accommodate the automobile, we now search for ways to discourage people from driving on the streets.
A gradual refinement
The steel rail is an artifact whose form has been carefully optimized. This gradual refinement of the design was done not by a single brilliant engineer but by more than a century of industrial evolution. The rail was never meant to be an object of beauty, but its cross section has all the elegance of fine typography.
Hyperart: U.S. Rail
The steepest grade on U.S. main-line track is at the small town of Saluda, on a Norfolk Southern route between Spartanburg, South Carolina, and Asheville, North Carolina. The grade goes on for three miles at a slope of 4 or 5 percent. Trains have not been running on the line since 2001, but the tracks are still maintained.
An emblem of friendship
Bridges make connections; they bring people together—a role that has made them a traditional emblem of friendship. Consider the town of Mostar in Bosnia-Herzegovina. When fighting between ethnic factions broke out there in the 1990s, nothing symbolized the social disintegration more clearly than the destruction of a sixteenth-century stone-arch bridge that had linked the two parts of the town on opposite banks of the Neretva River. And the emblem of efforts to heal the divisions is a rebuilt bridge, opened with fireworks and fanfare in July of 2004.
Routine design
When we think of bridges, it is the dramatic and monumental long spans that come to mind first, especially the lithe suspension bridges such as the Golden Gate and the pure geometric arches such as Sydney Harbour. But the majority of bridges are not such spectacular structures. Most of them are ordinary overpasses, with spans of 30 or 40 feet, carrying roadways or rails across other thoroughfares or over small streams. You see such bridges by the dozen on any drive down the Interstate. They may be lacking in glamour, but they are more representative of a bridge builder's art.
The engineering and construction of girder bridges are pretty routine these days, but the bridges are not quite standard items you order from a catalogue. The girders, whether of steel or concrete, are custom-build for each bridge, then trucked to the site and hoisted into place with a crane. The designer still has scope for variation and creativity, and it shows out on the highways: some overpasses are prettier than others.
No Smoking
What's that big electrical cord that also connects the ship to the dock? It's not a power cord to run machinery aboard ship; it's a grounding strap, to prevent sparks from static electricity. Something else you're sure to notice on a tanker is a big warning sign about the fire hazard. Frederick Allen, the editor of American Heritage of Invention & Technology, has remarked that all tankers seem to be named No Smoking.
Port furniture
All the miscellaneous fittings and fixtures on wharves and piers and elsewhere in nautical neighborhoods are known by the charming term port furniture.
The mirror-image economy
When we enter the world of refuse and waste, we cross over into a mirror-image economy. In the "normal" world, we pay to acquire things; on the other side of the looking glass, we pay to get rid of them. Junk isn't merely worthless; it has negative value.
A chemical engineer once told me about a recent improvement in a manufacturing process; by fine-tuning a chemical synthesis he had increased the yield of a certain commodity from 98 percent to 99 percent. I congratulated him, but I couldn't help remarking that this seemed like a rather paltry improvement. "Ah, you miss the important point," he said. "The amount of waste goes from 2 percent down to 1 percent. It's cut in half. We save tremendously on disposal costs."
NIMBY, BANANA, NOPE
Waste-disposal facilities of all kinds—landfills, incinerators, even transfer stations—are sure bets for generating the NIMBY response: not in my backyard. In its most cynical form, NIMBY is the attitude of citizens who acknowledge the need for a facility, somewhere, but who oppose a plan for building it simply because the selected site is too close to their own property. But opposition to landfills and many other kinds of development goes well beyond cynical NIMBY. Another catch phrase for this phenomenon is BANANA: build absolutely nothing anywhere near anybody. Or else it's NOPE: not on planet earth.
Creations of human artifice
In the twenty-first century, the question most of us ask when disaster strikes is not "How could God let that happen?" but "Who screwed up?" This is a salutary development: We take responsibility for the world we live in. Whether or not our world is the best of all possible worlds, it is a world we have made for ourselves. We live in an engineered landscape, on an engineered planet. Our cities and farms, our dwellings and vehicles, our power plans and communication networks—these are all creations of human artifice. If we don't like it here, we have only ourselves to blame.
What kind of world it's going to be
The wonderful thing about living in a world of our own creation is that we get to choose what kind of world it's going to be—at least in principle. But the promise is meaningful only if a broad enough "we" can be engaged in the process. At present, mechanisms and democratic institutions for making collective decisions about the deployment of technology are hopelessly cumbersome. How can anyone make a sensible choice without being able to weigh one alternative against another?