Church on the Water, Hokkaido, 1985–8 At the edges of the outer walls to left and right, the slate floor is held back, creating a shadowed slot into which the concrete wall slips out of sight. Because the wall does not meet and bear upon the floor, as is usual, the relationship of the wall to the ground is uncertain, and the rippling surface of the black slate floor appears to float free of the walls, merging with the rippling surface of the water. Robert McCarter & Juhani Pallasmaa, Understanding Architecture weight
Lightness & Heaviness "Lightness is born of heaviness and heaviness of lightness, instantaneously and reciprocally, returning creation for creation, gaining strength proportionally as they gain in life, and as much more in life as they gain in motion. They destroy one another also at the same time, fulfilling a mutual vendetta, proof that lightness is created only in conjunction with heaviness, and heaviness only where lightness follows." — Leonardo da Vinci Robert McCarter & Juhani Pallasmaa, Understanding Architecture materialweight
Buttresses Buttresses, Ruskin writes, are structures against pressure: a cathedral’s walls want to fall outward, for example, pushed aside by the relentless weight of the roof. But this gravitational pressure can be stabilized by an exoskeleton: a sequence of buttresses that will prevent those walls from collapsing outward. However, Ruskin points out, there is a similar kind of pressure from the waves of the sea. Think of the curved hull of a ship, he writes, which is internally buttressed against the “crushing force” of the ocean around it. It is a kind of inside-out cathedral. Geoff Manaugh, BLDGBLOG www.bldgblog.com weightarchitecture
Optical Glass House A Building by Hiroshi Nakamura www.archdaily.com Show image 0 Show image 1 A façade of some 6,000 pure-glass blocks (50mm x 235mm x 50mm) was employed. The pure-glass blocks, with their large mass-per-unit area, effectively shut out sound and enable the creation of an open, clearly articulated garden that admits the city scenery. To realize such a façade, glass casting was employed to produce glass of extremely high transparency from borosilicate, the raw material for optical glass. The casting process was exceedingly difficult, for it required both slow cooling to remove residual stress from within the glass, and high dimensional accuracy. Even then, however, the glass retained micro-level surface asperities, but we actively welcomed this effect, for it would produce unexpected optical illusions in the interior space. wabi-sabi