Church on the Water, Hokkaido, 1985–8 At the edges of the outer walls to left and right, the slate floor is held back, creating a shadowed slot into which the concrete wall slips out of sight. Because the wall does not meet and bear upon the floor, as is usual, the relationship of the wall to the ground is uncertain, and the rippling surface of the black slate floor appears to float free of the walls, merging with the rippling surface of the water. Robert McCarter & Juhani Pallasmaa, Understanding Architecture weight
Lightness & Heaviness "Lightness is born of heaviness and heaviness of lightness, instantaneously and reciprocally, returning creation for creation, gaining strength proportionally as they gain in life, and as much more in life as they gain in motion. They destroy one another also at the same time, fulfilling a mutual vendetta, proof that lightness is created only in conjunction with heaviness, and heaviness only where lightness follows." — Leonardo da Vinci Robert McCarter & Juhani Pallasmaa, Understanding Architecture materialweight
Buttresses Buttresses, Ruskin writes, are structures against pressure: a cathedral’s walls want to fall outward, for example, pushed aside by the relentless weight of the roof. But this gravitational pressure can be stabilized by an exoskeleton: a sequence of buttresses that will prevent those walls from collapsing outward. However, Ruskin points out, there is a similar kind of pressure from the waves of the sea. Think of the curved hull of a ship, he writes, which is internally buttressed against the “crushing force” of the ocean around it. It is a kind of inside-out cathedral. Geoff Manaugh, BLDGBLOG www.bldgblog.com weightarchitecture
Materials and how to employ them Forming a paper clip presents a common dilemma encountered by engineers and inventors: the very properties of the material that make it possible to be shaped into a useful object also limit its use. If one were to try and make a paper clip out of wire that stayed bent too easily, it would have little spring and not hold papers very tightly. On the other hand, if one were to use wire that did not stay bent, then the clip could not even be formed. Thus, understanding the fundamental behavior of materials and how to employ them to advantage is often a principle reason that something as seemingly simple as a paper clip cannot be developed sooner than it is. Henry Petroski, The Evolution of Useful Things Ideas behind their time material