Church on the Water, Hokkaido, 1985–8 At the edges of the outer walls to left and right, the slate floor is held back, creating a shadowed slot into which the concrete wall slips out of sight. Because the wall does not meet and bear upon the floor, as is usual, the relationship of the wall to the ground is uncertain, and the rippling surface of the black slate floor appears to float free of the walls, merging with the rippling surface of the water. Robert McCarter & Juhani Pallasmaa, Understanding Architecture weight
Lightness & Heaviness "Lightness is born of heaviness and heaviness of lightness, instantaneously and reciprocally, returning creation for creation, gaining strength proportionally as they gain in life, and as much more in life as they gain in motion. They destroy one another also at the same time, fulfilling a mutual vendetta, proof that lightness is created only in conjunction with heaviness, and heaviness only where lightness follows." — Leonardo da Vinci Robert McCarter & Juhani Pallasmaa, Understanding Architecture materialweight
Buttresses Buttresses, Ruskin writes, are structures against pressure: a cathedral’s walls want to fall outward, for example, pushed aside by the relentless weight of the roof. But this gravitational pressure can be stabilized by an exoskeleton: a sequence of buttresses that will prevent those walls from collapsing outward. However, Ruskin points out, there is a similar kind of pressure from the waves of the sea. Think of the curved hull of a ship, he writes, which is internally buttressed against the “crushing force” of the ocean around it. It is a kind of inside-out cathedral. Geoff Manaugh, BLDGBLOG www.bldgblog.com weightarchitecture
Combinations and arrangements Everything designed has an element of arbitrariness in its form. Loewy described how groups of his designers used to go about designing a new model automobile. Different groups were given different tasks, such as the front and rear of the car, and the conceptual work began, to be cut off at some predetermined time by deadlines that were imposed at the outset. After a time, there were "piles of rough sketches," and Loewy saw the design proceed as follows: Now the important process of elimination begins. From the roughs, I select the designs that indicate germinal direction. Those that show the greatest promise are studied in detail, and these in turn are used in combination or arrangements with one another. A promising front treatment can be tried in combination with a likely side elevation sketch, etc. From this a new set of designs emerges. These are then sketched in detail. After careful analysis, they boil down to four or five. Raymond Loewy, The Evolution of Useful Things Useless work on useful things drawing