Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers.
The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business.
To build a folly is essentially to do something a second time, something at an inopportune moment. That something is always the memory of something forgotten, about which we can paradoxically say "There it is again."
Follies were misunderstood, purposeless constructions. They were often only small, extravagant gestures in a garden, easily whisking off the imagination to distant lands, a sort of time capsule built to awaken the memory and induce surprise in passers-by. They marked locations, organized secondary paths in a park, or simply predicted the arrival of better times—a demarcation, a sacred spot, a mysterious trail, a hill whose tragic rocky nature begged for a tower, a party, or the arrival of summer.