heat
Winter is by far the oldest of the seasons
...and we feel warm because it is cold out-of-doors.
Retained as a quality
Thermal information is not differentiated in our memory; rather it is retained as a quality, or underlying tone, associated with the whole experience of the place. It contributes to our sense of the particular personality, or spirit, that we identify with that place. In remembering the spirit of a place, we can anticipate that if we return, we will have the same sense of comfort or relaxation as before.
Two thermal archetypes
The hearth, a refuge of dry warmth from a cold world, and the oasis, a preserve of coolness and moisture in a desert wilderness.
The notion of a thermal optimum persists
There is an underlying assumption that the best thermal environment never needs to be noticed, and that once an objectively "comfortable" thermal environment has been provided, all of our thermal needs will have been met. The use of all of our extremely sophisticated environmental control systems is directed to this one end—to produce standard comfort zone conditions.
Warmed by the afternoon sun
Textbooks on water-system engineering state that supply mains are generally installed on the north side of the street in the Northern Hemisphere and on the south side in the Southern Hemisphere, so that the sun will warm them. In both hemispheres they are supposed to be on the east side of north-south streets, on the premise that the afternoon sun is warmer than the morning sun.
Predicted Mean Vote
A DefinitionThe predicted mean vote (PMV) was developed by Povl Ole Fanger at Kansas State University and the Technical University of Denmark as an empirical fit to the human sensation of thermal comfort. It was later adopted as an ISO standard. It predicts the average vote of a large group of people on the a seven-point thermal sensation scale where:
- +3 = hot
- +2 = warm
- +1 = slightly warm
- 0 = neutral
- -1 = slightly cool
- -2 = cool
- -3 = cold
Just-in-time Design
There is a disconnect between product design and product engineering.
Finish designing as close to the end of a sprint as possible
The traditional process of delivering design, vs. delivering design just in time.
Designers are often working at least one sprint ahead of engineers. While one sprint might not seem like much of a lag, a typical product team learns a lot after the design hand-off. ...Instead of working ahead, we should finish designing as close to the end of a sprint as possible: just-in-time design.
Just-in-time manufacturing
Get embedded in the team. Designers should use sprint planning, grooming, standup, and retro as opportunities to provide design to — and receive feedback from — the rest of the team. Designs can take the form of written or verbal descriptions, not just wireframes and high-fidelity mockups.
Only design what’s needed. Use constant communication between engineering and product partners to understand what your collaborators will need next. Then, plan on delivering only what is needed, and nothing more. Use the agile process — grooming, planning, and retro — to find any shortfalls or excesses.
Avoid creating a backlog of designs. Designs don’t age well. In the time between finishing design and shipping code, it’s likely that you’ll learn something new that changes your understanding. If you’re producing more design than can be implemented, focus more on the quality of each design.