energy
Tracing Power Lines with the Pylon Appreciation Society
Pylons
Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers.
The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business.
A haunting, syncopated music
"Rappers" on the roof of the electrostatic precipitator knock the accumulated dust free, letting it fall into the storage hopper. Each rapper is the size and shape of a baseball bat. Inside is an electromagnet that pulls a steel plunger upward, then allows it to fall again, producing a sharp knock. The rappers are energized at seemingly random intervals, producing a haunting, syncopated music. (The rhythm seemed more modern jazz than rap.)
Safety cut rope axe man
In the first nuclear reactor, constructed by Enrico Fermi in 1942 under the bleachers of the University of Chicago football stadium, the control rods were held up by a manila rope. A man with an axe was told to cut the rope if the reactor got out of hand. This "safety cut rope axe man" is supposedly the origin of the term SCRAM for an emergency shutdown procedure.
Color coding
Telephone wires erupt in a multicolor cascade in a ground-level, pedestal-type splice case on a city street.
Dividing the set of 10 colors into two contrasting groups of 5 allows for exactly 25 combinations with one color from each group; thus, each pair in a bundle can be uniquely colored. A similar color code is applied to the ribbons that bind together all the pairs in a bundle, and to those of the superbundles. The result is highly festive! A specific wire might be identified as the blue-red conductor within the orange-black bundle within the brown-yellow superbundle.
The heart of systems engineering
While the client has some knowledge of his symptoms, he may not understand the real causes of them, and it is foolish to try to cure the symptoms only. Thus while the systems engineers must listen to the client, they should also try to extract from the client a deeper understanding of the phenomena. Therefore, part of the job of a systems engineer is to define, in a deeper sense, what the problem is and to pass from the symptoms to the causes.
Just as there is no definite system within which the solution is to be found, and the boundaries of the problem are elastic and tend to expand with each round of solution, so too there is often no final solution, yet each cycle of input and solution is worth the effort. A solution which does not prepare for the next round with some increased insight is hardly a solution at all.
I suppose the heart of systems engineering is the acceptance that there is neither a definite fixed problem nor a final solution, rather evolution is the natural state of affairs. This is, of course, not what you learn in school, where you are given definite problems which have definite solutions.