In optics, a caustic is the envelope of light rays reflected or refracted by a curved surface or object, or the projection of that envelope of rays on another surface. The caustic is a curve or surface to which each of the light rays is tangent, defining a boundary of an envelope of rays as a curve of concentrated light.
A piece of milled plexiglass acting as a projecting lens; via the Computer Graphics and Geometry Lab at the École Polytechnique Fédérale de Lausanne
New milling techniques applied to glass and plexiglass panels could be used to “create windows that are also cryptic projectors, summoning ghostly images from sunlight.”
[Pauly and Bompas] hope that the technique will be used in architectural design, to create windows that mould sunlight and throw images or patterns onto walls or floors,” which, if timed, milled, and manipulated just right, could produce a slowly animated sequence of images being projected by an otherwise empty window during different times of day.
To control the shape of a caustic pattern generated by a specular or refractive surface, we need to solve the inverse problem: how can we change the surface geometry, such that incident light is redirected to produce a desired caustic image?
While the client has some knowledge of his symptoms, he may not understand the real causes of them, and it is foolish to try to cure the symptoms only. Thus while the systems engineers must listen to the client, they should also try to extract from the client a deeper understanding of the phenomena. Therefore, part of the job of a systems engineer is to define, in a deeper sense, what the problem is and to pass from the symptoms to the causes.
Just as there is no definite system within which the solution is to be found, and the boundaries of the problem are elastic and tend to expand with each round of solution, so too there is often no final solution, yet each cycle of input and solution is worth the effort. A solution which does not prepare for the next round with some increased insight is hardly a solution at all.
I suppose the heart of systems engineering is the acceptance that there is neither a definite fixed problem nor a final solution, rather evolution is the natural state of affairs. This is, of course, not what you learn in school, where you are given definite problems which have definite solutions.