Routine design When we think of bridges, it is the dramatic and monumental long spans that come to mind first, especially the lithe suspension bridges such as the Golden Gate and the pure geometric arches such as Sydney Harbour. But the majority of bridges are not such spectacular structures. Most of them are ordinary overpasses, with spans of 30 or 40 feet, carrying roadways or rails across other thoroughfares or over small streams. You see such bridges by the dozen on any drive down the Interstate. They may be lacking in glamour, but they are more representative of a bridge builder's art. The engineering and construction of girder bridges are pretty routine these days, but the bridges are not quite standard items you order from a catalogue. The girders, whether of steel or concrete, are custom-build for each bridge, then trucked to the site and hoisted into place with a crane. The designer still has scope for variation and creativity, and it shows out on the highways: some overpasses are prettier than others. Brian Hayes, Infrastructure: A Guide to the Industrial Landscape engineeringdesignautomationroutine
The heart of systems engineering While the client has some knowledge of his symptoms, he may not understand the real causes of them, and it is foolish to try to cure the symptoms only. Thus while the systems engineers must listen to the client, they should also try to extract from the client a deeper understanding of the phenomena. Therefore, part of the job of a systems engineer is to define, in a deeper sense, what the problem is and to pass from the symptoms to the causes. Just as there is no definite system within which the solution is to be found, and the boundaries of the problem are elastic and tend to expand with each round of solution, so too there is often no final solution, yet each cycle of input and solution is worth the effort. A solution which does not prepare for the next round with some increased insight is hardly a solution at all. I suppose the heart of systems engineering is the acceptance that there is neither a definite fixed problem nor a final solution, rather evolution is the natural state of affairs. This is, of course, not what you learn in school, where you are given definite problems which have definite solutions. Richard Hamming, The Art of Doing Science and Engineering: Learning to Learn What the problem isComplete and consistent requirements