Routine design When we think of bridges, it is the dramatic and monumental long spans that come to mind first, especially the lithe suspension bridges such as the Golden Gate and the pure geometric arches such as Sydney Harbour. But the majority of bridges are not such spectacular structures. Most of them are ordinary overpasses, with spans of 30 or 40 feet, carrying roadways or rails across other thoroughfares or over small streams. You see such bridges by the dozen on any drive down the Interstate. They may be lacking in glamour, but they are more representative of a bridge builder's art. The engineering and construction of girder bridges are pretty routine these days, but the bridges are not quite standard items you order from a catalogue. The girders, whether of steel or concrete, are custom-build for each bridge, then trucked to the site and hoisted into place with a crane. The designer still has scope for variation and creativity, and it shows out on the highways: some overpasses are prettier than others. Brian Hayes, Infrastructure: A Guide to the Industrial Landscape engineeringdesignautomationroutine
Tanikawa House A Building socks-studio.com Show image 0 Show image 1 Show image 2 Photos of the Tanikawa House, designed by architect Kazuo Shinohara. Built in 1974, this summer house materializes the act of covering a piece of earth, making it an inhabitation only by means of a roof protecting the dirt soil of the ground. The house lies on a slope in a middle of a wood and grows through an exposed timber frame structure which supports a large pitched roof. Under the roof, a minimal section of the house located on a side hosts some specific living functions concentrated on two floors: a bathroom, a kitchen, a bedroom and a staircase. This section lies in parallel to the main “earth room” (or “summer room”) and overlooks it. minimalism