scale
The scale of resolution determines what is seen
Scales of cities, scales of software
Things that don't scale
As inanimate as it was gigantic
A Fragment by John RuskinAnd among such false means largeness of scale in the dwelling-house was of course one of the easiest and most direct. All persons, however senseless or dull, could appreciate size: it required some exertion of intelligence to enter into the spirit of the quaint carving of the Gothic times, but none to perceive that one heap of stones was higher than another. And therefore, while in the execution and manner of work the Renaissance builders zealously vindicated for themselves the attribute of cold and superior learning, they appealed for such approbation as they needed from the multitude, to the lowest possible standard of taste; and while the older workman lavished his labor on the minute niche and narrow casement, on the doorways no higher than the head, and the contracted angles of the turreted chamber, the Renaissance builder spared such cost and toil in his detail, that he might spend it in bringing larger stones from a distance; and restricted himself to rustication and five orders, that he might load the ground with colossal piers, and raise an ambitious barrenness of architecture, as inanimate as it was gigantic, above the feasts and follies of the powerful or the rich.
Ri — The Distance Walked in an Hour
An Article by Craig ModA ri is a unit of measure, it’s about how far a person can walk in an hour at a reasonable pace. It clocks out at roughly 3.93 kilometers.
Remnants of the ri system are scattered along the old roads of Japan. During the Edo period, ri were marked recurrently by hulking earthen mounds that flanked the road — ichi-ri zuka, “one-ri mounds.” There are only a handful of “originals” left. When you pass one with an old cypress or oak growing from its center it becomes a tiny moment of celebration.
Just-in-time Design
There is a disconnect between product design and product engineering.
Finish designing as close to the end of a sprint as possible
The traditional process of delivering design, vs. delivering design just in time.
Designers are often working at least one sprint ahead of engineers. While one sprint might not seem like much of a lag, a typical product team learns a lot after the design hand-off. ...Instead of working ahead, we should finish designing as close to the end of a sprint as possible: just-in-time design.
Just-in-time manufacturing
Get embedded in the team. Designers should use sprint planning, grooming, standup, and retro as opportunities to provide design to — and receive feedback from — the rest of the team. Designs can take the form of written or verbal descriptions, not just wireframes and high-fidelity mockups.
Only design what’s needed. Use constant communication between engineering and product partners to understand what your collaborators will need next. Then, plan on delivering only what is needed, and nothing more. Use the agile process — grooming, planning, and retro — to find any shortfalls or excesses.
Avoid creating a backlog of designs. Designs don’t age well. In the time between finishing design and shipping code, it’s likely that you’ll learn something new that changes your understanding. If you’re producing more design than can be implemented, focus more on the quality of each design.