Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers.
The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business.
Throughout a racing season there is constant, relentless pressure on the designer to keep making design improvements. But there is a limit to what can be achieved with any car design, before a jump has to be made to basically a new design, an innovation. As Gordon Murray says, ‘Given the situation and the pressure at any one time, you do get to the brick wall...I mean you're doing all these normal modifications, you know you can't go any quicker, you need to make the step forward.’
In the midst of the pressure, the fervour, the panic, he ‘used to get breakthroughs, I mean I used to get like suddenly a mental block's lifted.’