Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers.
The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business.
A Fermi estimate is a quick-and-dirty solution to an arbitrary scientific or engineering analysis problem. Fermi estimation uses widely known numbers, readily observable phenomenology, basic physics equations, and a bunch of approximation techniques to arrive at rough answers that tend to be correct within an order of magnitude or so. The term is named for Enrico Fermi, who was famously good at this sort of thing.
…It struck me that there is counterpart to this kind of thinking on the synthesis side, where you use similar techniques to arrive at a very rough design for a complex engineered artifact. I call such a design approach Dyson design, after the physicist Freeman Dyson, who was one of the best practitioners of it (not to be confused with inventor James Dyson, whose designs, ironically, are not Dyson designs).