Thermal information is not differentiated in our memory; rather it is retained as a quality, or underlying tone, associated with the whole experience of the place. It contributes to our sense of the particular personality, or spirit, that we identify with that place. In remembering the spirit of a place, we can anticipate that if we return, we will have the same sense of comfort or relaxation as before.
There is an underlying assumption that the best thermal environment never needs to be noticed, and that once an objectively "comfortable" thermal environment has been provided, all of our thermal needs will have been met. The use of all of our extremely sophisticated environmental control systems is directed to this one end—to produce standard comfort zone conditions.
Textbooks on water-system engineering state that supply mains are generally installed on the north side of the street in the Northern Hemisphere and on the south side in the Southern Hemisphere, so that the sun will warm them. In both hemispheres they are supposed to be on the east side of north-south streets, on the premise that the afternoon sun is warmer than the morning sun.
The predicted mean vote (PMV) was developed by Povl Ole Fanger at Kansas State University and the Technical University of Denmark as an empirical fit to the human sensation of thermal comfort. It was later adopted as an ISO standard. It predicts the average vote of a large group of people on the a seven-point thermal sensation scale where:
A façade of some 6,000 pure-glass blocks (50mm x 235mm x 50mm) was employed. The pure-glass blocks, with their large mass-per-unit area, effectively shut out sound and enable the creation of an open, clearly articulated garden that admits the city scenery. To realize such a façade, glass casting was employed to produce glass of extremely high transparency from borosilicate, the raw material for optical glass. The casting process was exceedingly difficult, for it required both slow cooling to remove residual stress from within the glass, and high dimensional accuracy. Even then, however, the glass retained micro-level surface asperities, but we actively welcomed this effect, for it would produce unexpected optical illusions in the interior space.