Drawing & Sketching
Kengo Kuma's sketches
Combinations and arrangements
Everything designed has an element of arbitrariness in its form. Loewy described how groups of his designers used to go about designing a new model automobile. Different groups were given different tasks, such as the front and rear of the car, and the conceptual work began, to be cut off at some predetermined time by deadlines that were imposed at the outset. After a time, there were "piles of rough sketches," and Loewy saw the design proceed as follows:
Now the important process of elimination begins. From the roughs, I select the designs that indicate germinal direction. Those that show the greatest promise are studied in detail, and these in turn are used in combination or arrangements with one another. A promising front treatment can be tried in combination with a likely side elevation sketch, etc. From this a new set of designs emerges. These are then sketched in detail. After careful analysis, they boil down to four or five.
This tactile form of doodling
Paper clips have also served as objects of more inwardly directed aggression by providing something for the fingers to twist grotesquely out of shape during phone calls, interviews, and meetings. This tactile form of doodling may consume only a fraction of the twenty billion paper clips produced each year, but it underscores the almost limitless functions to which a single form can lead.
From the desk of: Austin Kleon
How do you work?
When I get home, I have two desks in my office — one’s “analog” and one’s “digital.” The analog desk has nothing but markers, pens, pencils, paper, and newspaper. Nothing electronic is allowed on the desk — this is how I keep myself off Twitter, etc. This is where most of my work is born. The digital desk has my laptop, my monitor, my scanner, my Wacom tablet, and a MIDI keyboard controller for if I want to record any music. (Like a lot of writers, I’m a wannabe musician.) This is where I edit, publish, etc.
Drawing as a means of thinking
Two-dimensional plans or sections can be seen with sketches and more diagrammatic marks all on the same piece of paper in what appears a confusing jumble.’ These sound like Gordon’s ‘wonder plots’. The architects also use their drawings as a means of thinking ‘aloud’, or ‘talking to themselves’, as Gordon put it. For example, Lawson reports the architect Richard MacCormac as saying, ‘I use drawing as a process of criticism and discovery’; and the engineer-architect Santiago Calatrava as saying, ‘To start with you see the thing in your mind and it doesn’t exist on paper and then you start making simple sketches and organizing things and then you start doing layer after layer.... it is very much a dialogue.’
The common elements in these similar descriptions are the use of drawing not only as a means of externalising cognitive images but also of actively ‘thinking by drawing’, and of responding, layer after layer and view after view, to the design as it emerges in the drawings. These observations also confirm Schön’s observation of designing as a ‘reflective conversation’ between the designer and the emerging design. It is the reliance on drawing, and the preference for the immediacy of the interaction and feedback that manual drawing gives, that makes the architects, like Gordon Murray, unenthusiastic about CAD as a conceptual design tool.
Drawing for parallel design thinking
An important feature of their strategy is parallel working - keeping design activity going at many levels simultaneously. The best cognitive aid for supporting and maintaining parallel design thinking is drawing. Drawing with the conventional tools of paper and pencil gives the flexibility to shift levels of detail instantaneously; allows partial, different views at different levels of detail to be developed side by side, or above and below and overlapping; keeps records of previous views, ideas and notes that can be accessed relatively quickly and inserted into the current frame of reference; permits and encourages the simultaneous, non-hierarchical participation of co-workers, using a common representation.
The drawing of partial solutions or representations also aids the designer’s thinking processes, and provides some ‘talk-back’. As well as drawing, innovative designers frequently like to undertake practical work related to the design solution, such as building models or mock-ups, or participating in construction.
The preliminary sketch
Among the best woodblock prints are many that seem not to have adhered strictly to the preliminary sketch. The sketch simply indicated a general direction, and in many cases was not used at all. Or it was even improved upon in the process of carving and brought vividly to life; the woodblock qualities of the print were accentuated and highlighted.
The computer creates a distance
Computer imaging tends to flatten our magnificent, multi-sensory, simultaneous and synchronic capacities of imagination by turning the design process into a passive visual manipulation, a retinal journey. The computer creates a distance between the maker and the object, whereas drawing by hand as well as working with models put the designer in a haptic contact with the object, or space.
A mind so in flux
A mind so in flux, so sensitive to intuitive insights, could never write an academic textbook. All he could retain on paper were indications, hints, allusions, like the delicate color dots and line plays on his pictures.
Agents of thought and experiment
The act of drawing serves to remind us that hands are agents of thought and experiment. Photography has a great future, but no matter how much ancillary wizardry photography accumulates, it will not be in competition with “drawing” in the broadest sense of that term. There will always be a role for exploration by the hands, encumbered by no more than a piece of ocher or a stick of charcoal.
Its practical utility is as a manifestation of the mind struggling with the meaning of what it encounters and what it wants to explore.
What you have observed closely
Drawing requires that you pay attention to every detail—even the seemingly unimportant ones. In creating an image (no matter how skillfully), the lines and tones on the paper provide ongoing feedback as to what you have observed closely and what you have not.
Anatomical Drawings of Staircase Spaces
A Book by Tomoyuki Tanakaminimator.app
An ApplicationMinimator is a minimalist graphical editor.
All drawings are made of lines in a grid based canvas. The lines are limited to vertical and horizontal lines, and quarter circles.
Right-Angle Doodling Machine
A Game by Clive Thompson- You draw one single line. It can be as long as you like.
- To start the line, you put your pen down.
- You can make right-angle turns only, either 90 degrees or -90 degrees.
- You cannot back up. You must always move forward.
- You don’t lift your pen until you’re ready to stop. When you lift the pen, the doodle is done.
A small store
A Gallery by Kyeoung Me LeeForget the computer — here’s why you should write and design by hand
An Article by Herbert LuiIn the middle of the 2000s, the designers at creative consultancy Landor installed Adobe Photoshop on their computers and started using it. General manager Antonio Marazza tells author David Sax:
“Overnight, the quality of their designs seemed to decline. After a few months of this, Landor’s Milan office gave all their designers Moleskine notebooks, and banned the use of Photoshop during the first week’s work on a project. The idea was to let their initial ideas freely blossom on paper, without the inherent bias of the software, before transferring them to the computer later for fine-tuning. It was so successful, this policy remains in place today.”
Back to the Drawing Board
An Article by Nick JonesThe lost art of drawing for engineers and architects.
- You can almost tell which software they were designed in
- Conversational drawing
- The effort heuristic
- Tablets have caught up
Section-perspective drawing
A Fragment by Gerhard KallmannCouncil Chamber Study Looking South. Gerhard M. Kallmann.
Kallmann’s distinctive section-perspective drawing technique seen here allowed the simultaneous exploration of both interior spaces and building systems.
Pictures of Websites
An Article by Matthew StrömWhen I was a product designer, people would ask what I did for a living, and sometimes I’d answer “I draw pictures of websites.”
Sure, I could just say “I design websites.” That’s true. The end result of my work is (hopefully) that a website looks better, works better, or results in better outcomes.
But most of my day isn’t spent looking at the website, or working on the code of the website, or manipulating the website directly in some way. It’s spent in Figma or Sketch, drawing pictures of how I think the website should look and work.
Through some kind of alchemy, the pictures I draw have an impact on the finished website. But they’re not all the same.
Architectural tracings
A Gallery by Nick TrombleyA lightbulb is not an idea
An Article by Ralph AmmerWith conventional placeholders, such as words, we can describe patterns for a large number of situations. On the other hand it is easy to fool yourself (and others) with words, since you can avoid to be specific. Any business meeting can confirm this.
When you draw something you are forced to be specific — and honest.
Our illustration of an “idea” from above is unconventional in the sense that it conveys specific original thoughts of what an idea is. It adds value to the words.
And that is the catch: The drawing must be unconventional to support the conventional words. We have to make sure not to use “words in disguise”. Take a common illustration for “idea” for example, which haunts flip charts all over the world: the lightbulb.
The lightbulb image works on a purely symbolic level, it only replaces the word “idea”. This image of a household item contains no original thought about what an idea is. While symbols like these work well as international replacements for words or icons to indicate a light switch for instance, they convey no nutritional value as illustrations — they are empty.
All the buildings in New York (that I've drawn so far)
The Real World of Technology
Technology is a system
Technology is not the sum of the artifacts, of the wheels and gears, of the rails and electronic transmitters. Technology is a system. It entails far more than its individual material components. Technology involves organization, procedures, symbols, new words, equations, and, most of all, a mindset.
Fish and water
How does one speak about something that is both fish and water, means as well as end?
Defining activities
One has to keep in mind how much the technology of doing something defines the activity itself.
Holistic and prescriptive technologies
Holistic technologies are normally associated with the notion of craft. Artisans, be they potters, weavers, metal-smiths, or cooks, control the process of their own work from beginning to finish. Using holistic technologies does not mean that people do not work together, but the way in which they work together leaves the individual worker in control of a particular process of creating or doing something.
The opposite is specialization by process; this I call prescriptive technology. Here, the making or doing of something is broken down into clearly identifiable steps. Each step is carried out by a separate worker, or group or workers, who need to be familiar only with the skills of performing that one step. This is what is normally meant by "division of labor".
That which requires caring
Today's real world of technology is characterized by the dominance of prescriptive technologies.
The temptation to design more or less everything according to prescriptive and broken-up technologies is so strong that it is even applied to those tasks that should be conducted in a holistic way. Any tasks that require caring, whether for people or nature, any tasks that require immediate feedback and adjustment, are best done holistically. Such tasks cannot be planed, coordinated, and controlled the way prescriptive tasks must be.
Prescriptive technologies eliminate the occasions for decision-making and judgment in general and especially for the making of principled decisions. Any goal of the technology is incorporated a priori in the design and is not negotiable.
One-machine policy
Today population forecasts are based on extensive and reliable data. However, no such demographic base exists for the world's growing population of machines and devices. Now may be the time to take machine demography seriously and enter into real discussions about machine population control.
The downgrading of experience
Today scientific constructs have become the model of describing reality rather than one of the ways of describing life around us. As a consequence there has been a very marked decrease in the reliance of people on their own experience and their own senses.
The downgrading of experience and the glorification of expertise is a very significant feature of the real world of technology.
Reciprocity
Whenever human activities incorporate machines or rigidly prescribed procedures, the modes of human interaction change. In general, technical arrangements reduce or eliminate reciprocity. Reciprocity is some manner of interactive give and take, a genuine communication among interacting parties.
Instruments of cooperation
When work isn't shared, the instruments of cooperation – listening, taking note, adjusting – atrophy like muscles that are no longer in use.
When all you have is a hammer
The success and spread of a particular tool – and this tool can be organizational or administrative as well as mechanical – has another consequence. Any task tends to be structured by the available tools. It can appear that the available tools represent the best or even the only way to deal with a situation.
Thus is may be wise, when communities are faced with new technological solutions to existing problems, to ask what these techniques may prevent and not only to check what the techniques promise to do.
Consumption
The proponents of technology in the 1840s were very enthusiastic about replacing workers with machines. But somehow I find no indication that they realized that while production could be carried out with few workers and still run to high outputs, buyers would be needed for those outputs. The realization that though the need for workers decreased, the need for purchasers could increase, did not seem to be part of the discourse on the machinery question. Since then, however, technology and its promoters have had to create a social institution – the consumer – in order to deal with the increasingly tricky problem that machines can produce but it is usually people who consume.
Bridges as walls
The biographer of Robert Moses, Robert A. Caro, refers to the bridges and underpasses of the famed New York State parkways. These bridges and underpasses are quite low, intentionally specified by Moses to allow only private cars to pass. All those who traveled by bus because they were poor or black or both were barred from the use and enjoyment of the parkland and its "public amenities" by the technical design of the bridges. Even at the time of Robert Moses, a political statement of the form "We don't want them blacks in our parks" would have been unacceptable in New York State. But a technological expression of the same prejudice appeared to be all right. Of course, to the public the intent of the design became evident only after it was executed, and then the bridges were there.
Designed to be ruins
I don't want to talk here about the grand designs of the past – the sort of thing one finds in majestic cities, in palaces and temples; the sorts of layouts that brought a friend of mine to sum up his first impression of Washington D.C. by saying, "The place seems to be designed to be ruins."
Little sense of season
The real world of technology denies the existence and the reality of nature. For instance, there is little sense of season as one walks through a North American or western European supermarket.
Just as there is a little sense of season, there is little sense of climate. Everything possible is done to equalize the ambiance – to construct and environment that is warm in the winter, cool in the summer.
Humility
Maybe what the real world of technology needs more than anything else are citizens with a sense of humility – the humility of Kepler or Newton, who studied the universe but knew they were not asked to run it.
Technological middle age
In the automobile's technological middle age, it is hard, if not impossible, to tune or repair one's own vehicle. Technical standardization of cars has occurred, and with it the elimination of the user's access to the machine itself. At the same time, the infrastructures that once served those who did not use automobiles atrophied and vanished. Some may say they were deliberately starved out. Railways gave way to more and more roadways. And thus a technology that had been perceived to liberate its users began to enslave them.
All things change
The authors of this prognostication evidently assumed that the introduction of the sewing machine would result in more sewing – and easier sewing – by those who had always sewn. They would do the work they had always done in an unchanged setting. Reality turned out to be quite different.
It should be evident by now that there is no such thing as "just introducing" a new gadget to do one particular task. It is foolish to assume that everything else in such a situation will remain the same; all things change when one thing changes.
Exploiting emotion
There are no shortcuts to the investment of time and care in friendship and human bonding, and it is fraudulent to pretend otherwise. When human loneliness becomes a source of income for others through devices, we'd better stop and think a bit about the place of human needs in the real world of technology.
The receiving end
At times it helps to rephrase an observation in line with a perspective from the receiving end of technology. When my colleagues in the field of cold-water engineering speak of "ice-infested waters", I am tempted to think of "rig-infested oceans". Language is a fine barometer of values and priorities. As such it deserves careful attention.
Speaking people
Surely those who oversee and guide municipal transportation systems ought to use public transit during their work days. Why not put a clause to that effect in their job description or contract?
Requiring those whose work has a major impact on people's lives to experience some of the impact is really not too much ask. It means that they speak "people" rather than French, Cree, or Spanish.
Ping-pong patterns
The role of asynchronicity in unraveling social and political patterns without apparent replacement with other patterns cannot be overestimated. The ping-pong pattern of verbal communication is no longer tied to space or time.
Mechanisms and organisms
"Kant described a mechanism as a functional unity, in which the parts exist for one another in the performance of a particular function.
An organism, on the other hand, is a functional and structural unity in which the parts exist for and by means of one another in the expression of a particular nature.
This means that the parts of an organism – leaves, roots, flowers, limbs, eyes, heart, brain – are not made independently and then assembled, as in a machine, but arise as a result of interactions within the developing organism."
— Brian Goodwin, How the Leopard Changed His Spots