Drawing & Sketching
Kengo Kuma's sketches
Combinations and arrangements
Everything designed has an element of arbitrariness in its form. Loewy described how groups of his designers used to go about designing a new model automobile. Different groups were given different tasks, such as the front and rear of the car, and the conceptual work began, to be cut off at some predetermined time by deadlines that were imposed at the outset. After a time, there were "piles of rough sketches," and Loewy saw the design proceed as follows:
Now the important process of elimination begins. From the roughs, I select the designs that indicate germinal direction. Those that show the greatest promise are studied in detail, and these in turn are used in combination or arrangements with one another. A promising front treatment can be tried in combination with a likely side elevation sketch, etc. From this a new set of designs emerges. These are then sketched in detail. After careful analysis, they boil down to four or five.
This tactile form of doodling
Paper clips have also served as objects of more inwardly directed aggression by providing something for the fingers to twist grotesquely out of shape during phone calls, interviews, and meetings. This tactile form of doodling may consume only a fraction of the twenty billion paper clips produced each year, but it underscores the almost limitless functions to which a single form can lead.
From the desk of: Austin Kleon
How do you work?
When I get home, I have two desks in my office — one’s “analog” and one’s “digital.” The analog desk has nothing but markers, pens, pencils, paper, and newspaper. Nothing electronic is allowed on the desk — this is how I keep myself off Twitter, etc. This is where most of my work is born. The digital desk has my laptop, my monitor, my scanner, my Wacom tablet, and a MIDI keyboard controller for if I want to record any music. (Like a lot of writers, I’m a wannabe musician.) This is where I edit, publish, etc.
Drawing as a means of thinking
Two-dimensional plans or sections can be seen with sketches and more diagrammatic marks all on the same piece of paper in what appears a confusing jumble.’ These sound like Gordon’s ‘wonder plots’. The architects also use their drawings as a means of thinking ‘aloud’, or ‘talking to themselves’, as Gordon put it. For example, Lawson reports the architect Richard MacCormac as saying, ‘I use drawing as a process of criticism and discovery’; and the engineer-architect Santiago Calatrava as saying, ‘To start with you see the thing in your mind and it doesn’t exist on paper and then you start making simple sketches and organizing things and then you start doing layer after layer.... it is very much a dialogue.’
The common elements in these similar descriptions are the use of drawing not only as a means of externalising cognitive images but also of actively ‘thinking by drawing’, and of responding, layer after layer and view after view, to the design as it emerges in the drawings. These observations also confirm Schön’s observation of designing as a ‘reflective conversation’ between the designer and the emerging design. It is the reliance on drawing, and the preference for the immediacy of the interaction and feedback that manual drawing gives, that makes the architects, like Gordon Murray, unenthusiastic about CAD as a conceptual design tool.
Drawing for parallel design thinking
An important feature of their strategy is parallel working - keeping design activity going at many levels simultaneously. The best cognitive aid for supporting and maintaining parallel design thinking is drawing. Drawing with the conventional tools of paper and pencil gives the flexibility to shift levels of detail instantaneously; allows partial, different views at different levels of detail to be developed side by side, or above and below and overlapping; keeps records of previous views, ideas and notes that can be accessed relatively quickly and inserted into the current frame of reference; permits and encourages the simultaneous, non-hierarchical participation of co-workers, using a common representation.
The drawing of partial solutions or representations also aids the designer’s thinking processes, and provides some ‘talk-back’. As well as drawing, innovative designers frequently like to undertake practical work related to the design solution, such as building models or mock-ups, or participating in construction.
The preliminary sketch
Among the best woodblock prints are many that seem not to have adhered strictly to the preliminary sketch. The sketch simply indicated a general direction, and in many cases was not used at all. Or it was even improved upon in the process of carving and brought vividly to life; the woodblock qualities of the print were accentuated and highlighted.
The computer creates a distance
Computer imaging tends to flatten our magnificent, multi-sensory, simultaneous and synchronic capacities of imagination by turning the design process into a passive visual manipulation, a retinal journey. The computer creates a distance between the maker and the object, whereas drawing by hand as well as working with models put the designer in a haptic contact with the object, or space.
A mind so in flux
A mind so in flux, so sensitive to intuitive insights, could never write an academic textbook. All he could retain on paper were indications, hints, allusions, like the delicate color dots and line plays on his pictures.
Agents of thought and experiment
The act of drawing serves to remind us that hands are agents of thought and experiment. Photography has a great future, but no matter how much ancillary wizardry photography accumulates, it will not be in competition with “drawing” in the broadest sense of that term. There will always be a role for exploration by the hands, encumbered by no more than a piece of ocher or a stick of charcoal.
Its practical utility is as a manifestation of the mind struggling with the meaning of what it encounters and what it wants to explore.
What you have observed closely
Drawing requires that you pay attention to every detail—even the seemingly unimportant ones. In creating an image (no matter how skillfully), the lines and tones on the paper provide ongoing feedback as to what you have observed closely and what you have not.
Anatomical Drawings of Staircase Spaces
A Book by Tomoyuki Tanakaminimator.app
An ApplicationMinimator is a minimalist graphical editor.
All drawings are made of lines in a grid based canvas. The lines are limited to vertical and horizontal lines, and quarter circles.
Right-Angle Doodling Machine
A Game by Clive Thompson- You draw one single line. It can be as long as you like.
- To start the line, you put your pen down.
- You can make right-angle turns only, either 90 degrees or -90 degrees.
- You cannot back up. You must always move forward.
- You don’t lift your pen until you’re ready to stop. When you lift the pen, the doodle is done.
A small store
A Gallery by Kyeoung Me LeeForget the computer — here’s why you should write and design by hand
An Article by Herbert LuiIn the middle of the 2000s, the designers at creative consultancy Landor installed Adobe Photoshop on their computers and started using it. General manager Antonio Marazza tells author David Sax:
“Overnight, the quality of their designs seemed to decline. After a few months of this, Landor’s Milan office gave all their designers Moleskine notebooks, and banned the use of Photoshop during the first week’s work on a project. The idea was to let their initial ideas freely blossom on paper, without the inherent bias of the software, before transferring them to the computer later for fine-tuning. It was so successful, this policy remains in place today.”
Back to the Drawing Board
An Article by Nick JonesThe lost art of drawing for engineers and architects.
- You can almost tell which software they were designed in
- Conversational drawing
- The effort heuristic
- Tablets have caught up
Section-perspective drawing
A Fragment by Gerhard KallmannCouncil Chamber Study Looking South. Gerhard M. Kallmann.
Kallmann’s distinctive section-perspective drawing technique seen here allowed the simultaneous exploration of both interior spaces and building systems.
Pictures of Websites
An Article by Matthew StrömWhen I was a product designer, people would ask what I did for a living, and sometimes I’d answer “I draw pictures of websites.”
Sure, I could just say “I design websites.” That’s true. The end result of my work is (hopefully) that a website looks better, works better, or results in better outcomes.
But most of my day isn’t spent looking at the website, or working on the code of the website, or manipulating the website directly in some way. It’s spent in Figma or Sketch, drawing pictures of how I think the website should look and work.
Through some kind of alchemy, the pictures I draw have an impact on the finished website. But they’re not all the same.
Architectural tracings
A Gallery by Nick TrombleyA lightbulb is not an idea
An Article by Ralph AmmerWith conventional placeholders, such as words, we can describe patterns for a large number of situations. On the other hand it is easy to fool yourself (and others) with words, since you can avoid to be specific. Any business meeting can confirm this.
When you draw something you are forced to be specific — and honest.
Our illustration of an “idea” from above is unconventional in the sense that it conveys specific original thoughts of what an idea is. It adds value to the words.
And that is the catch: The drawing must be unconventional to support the conventional words. We have to make sure not to use “words in disguise”. Take a common illustration for “idea” for example, which haunts flip charts all over the world: the lightbulb.
The lightbulb image works on a purely symbolic level, it only replaces the word “idea”. This image of a household item contains no original thought about what an idea is. While symbols like these work well as international replacements for words or icons to indicate a light switch for instance, they convey no nutritional value as illustrations — they are empty.
All the buildings in New York (that I've drawn so far)
The Design of Design
What's Wrong With This Model?
A ChapterDesign process models: A summary argument
- A formal design process model is needed, to help organize design work, to aid communication in and about projects, and for teaching.
- Having a visual, geometric representation of a design process model is crucial, for designers are spatial thinkers. They will most easily learn, think about, share, and talk in terms of a model with a clear geometric picture.
- The Rational Model of design occurs naturally to engineers.
- The linear, step-by-step Rational Model is highly misleading. It does not reflect what real designers do, or what the best design thinkers identify as the essence of the design process.
- The bad model matters. It has led to the too-early binding of requirements, leading in turn to bloated products and schedule/budget/performance disasters.
- The Rational Model has persisted in practice despite its inadequacies and plenty of cogent critiques. This is because of its seductive logical simplicity, and because builders and clients needs “contracts."
- Several alternative models have been proposed. I find Boehm’s Spiral Model the most promising. We need to keep developing it.
The spiral model
The spiral shape certainly suggests progress. It associates successive repetitions of the same activity. The geometric shape is easily understood and memorable. The model emphasizes prototyping, starting with user-interface prototypes and user testing long before an operational prototype is possible.
Since a development model is principally used by developers, I believe having it designer-centered is entirely appropriate. With Boehm and against Denning and Dragon, I advocate frequent but not continuous interaction with representative users, with successive prototypes as the vehicles.
I strongly believe that way forward is to embrace and develop the Spiral Model.
A grossly obese set of requirements
Who advocates in the requirements process for the product itself—its conceptual integrity, its efficiency, its economy, it’s robustness? Often, no one. As often, an architect or engineer who can offer only opinion based on taste and instinct, unbuttressed as yet by facts. For in a classical Waterfall Model product process, requirements are set before design is begun.
The result, of course, is a grossly obese set of requirements, the union of many wish lists, assembled without constraints. Usually, the list is neither prioritized nor weighted. The social forces in the committee forbid the painful conflicts occasioned by even weighting, much less prioritizing.
Requirements proliferation
Any attempt to formulate all possible requirements at the start of a project will fail and would cause considerable delays. — Pahl and Beitz, Engineering Design
As Project Manager, I had to reject the requirements document as totally impractical, and have a quite small team of architects, marketers, and implementers extract the essence.
Requirements proliferation must be fought, by both birth control and infanticide.
The architectural contracting model
It is the necessity for contracts, whether within an organization or between organizations, that forces the too-early binding of goals, requirements, constraints. The pressure for a complete and agreed-upon set of requirements run into the hard fact, that it is essentially impossible to specify any complete and accurate set of requirements for any complex system except in iterative interaction with the design process.
How have the centuries-old building design disciplines handled this perplexity? Fundamentally, by a quite different contracting model.
- The client develops a program, not a specification, for the building.
- He contracts with an architect, usually on an hourly or percentage basis, for services, not for a specified product.
- The architect elicits from the client, the users, and other stakeholders a more complete program, which does not pretend to be a rigid contractable product specification.
- The architect does a conceptual design that approximates the reconciliation of program and the constraints of budget, schedule, and code. This serves as a first prototype, to be conceptually tested by the stakeholders.
- After iteration, the architect performs design development, often producing more detailed drawings, a 3-D scale model, mockups, and so on. After stakeholder iteration, the architect produces construction drawings and specifications.
- The client uses these drawings and specifications to enter into a fixed-price contract for the product.
Notice how this long-evolved model separates the contract for design from the contract for construction. Even when both are performed by the same organization, this separation clarifies many things.
The rational model of design
Engineers seem to have a clear, if usually implicit, model of the process of design. It is usually an orderly model of an orderly process as the engineer conceives it.
The notion that the design process should be modeled as a systematic step-by-step process seems to have first developed in the German mechanical engineering community.
Herbert Simon independently argues for design as a search process in The Sciences of the Artificial. He was motivated to lay out a strictly rational model of design precisely because such a model was a necessary precursor to automating design. His model remains influential even if today we recognize the "wicked problem" of original design as one of the least promising candidates for AI.
In software engineering, Winston Royce independently introduced a seven-step Waterfall Model to bring order to the process. In fact, Royce introduced his waterfall as a straw man that he then argued against, but many people have cited and followed the straw man rather than his more sophisticated models. Even if ironically, Royce's seven-step model must be considered one of the foundational statements of the Rational Model of Design.
Design process models
Any systematization of the design process is a great step forward compared to "Let's just start coding, or building." It:
- Provides clear steps for planning a design project
- Furnishes clearly definable milestones
- Suggests project organization and staffing
- Helps communication within the design team
- Is readily teachable to novices, and tells novices facing their first design assignments where to begin.
The Rational Model in particular brings yet more advantages. The early explicit statement of goals, secondary desiderata, and constraints helps a team avoid wandering, and it breeds team unification on purposes. Planning the whole design process before starting coding or formal drawings avoids many troubles and much wasted effort. Casting the process as a systematic search of a design space broadens the horizon of the individual designers and lifts their eyes far beyond their previous personal experiences.
But the rational model is much too simplistic, even in Simon's richly developed version.
The dual ladder
The first task for growing designers, as opposed to managers, is to craft a proper career path for them, one whose compensation and sociological status reflect their true value to the creative enterprise. This is commonly called the dual ladder. It it easy to give corresponding salaries to corresponding rungs, but it requires strong proactive measures to give them equal prestige: equal offices, equal staff support, reverse-biased raises when duties change.
Why does the dual ladder need special attention? Perhaps because managers, being human, are inherently inclined to consider their own tasks more difficult and important than design and need to deliberately assess what makes creativity and innovation happen.
A platonic ideal
As the architecture design progressed, I observed what at first seemed quite strange. For the architecture team, the real System/360 was the Design Concept itself, a Platonic ideal computer. Those physical and electrical Model 50, Model 60, Model 70, and Model 90 things under construction out on the engineering floors were but Plato’s shadows of the real System/360. The real System/360’s most complete and faithful embodiment was not in silicon, copper, and steel, but in the prose and diagrams of IBM System/360 Principles of Operation, the programmer’s machine language manual.
I had a similar experience with the View/360 beach house. Its Design Concept came to be real long before any construction began. It persisted through many versions of drawings and cardboard models.
The design concept
Is there positive value to recognizing an invisible Design Concept as a real entity in design conversations? I think so.
First, great designs have conceptual integrity—unity, economy, clarity. They not only work, they delight, as Vitruvius first articulated. We use terms such as elegant, clean, beautiful to talk about bridges, sonatas, circuits, bicycles, computers, and iPhones. Recognizing the Design Concept as an entity helps us to seek its integrity in our own solo designs, to work together for it in team designs, and to teach it to our youth.
Second, talking frequently about the Design Concept as such vastly aids communication within a design team. Unity of concept is the goal; it is achieved only by much conversation.
Thus, moviemakers use storyboards to keep their design conversations focused on the Design Concept, rather than on implementation details.
The Idea
The design is thus the mental formulation, which Sayers calls “the Idea,” and it can be complete before any realization is begun. Mozart’s response to his father’s inquiry about an opera due to the duke in three weeks both stuns us and clarifies the concept.
For most human makers of things, the incompletenesses and inconsistencies of our ideas become clear only during implementation. Thus it is that writing, experimentation, “working out,” are essential disciplines for the theoretician.
The boldest decisions
In retrospect, many of the case studies have a striking common attribute: the boldest design decisions, whoever made them, have accounted for a high fraction of the goodness of the outcome. These bold decisions were made due sometimes to vision, sometimes to desperation. They were always gambles, requiring extra investment in hopes of getting a much better result.
Intuition and systems
Systematic design excluding intuition yields pedestrian follow-ons and knock-offs; intuitive design without system yields flawed fancies. How to weld intuition and systematic approach? How to grow as a designer? How to function in a design team?