Routine design When we think of bridges, it is the dramatic and monumental long spans that come to mind first, especially the lithe suspension bridges such as the Golden Gate and the pure geometric arches such as Sydney Harbour. But the majority of bridges are not such spectacular structures. Most of them are ordinary overpasses, with spans of 30 or 40 feet, carrying roadways or rails across other thoroughfares or over small streams. You see such bridges by the dozen on any drive down the Interstate. They may be lacking in glamour, but they are more representative of a bridge builder's art. The engineering and construction of girder bridges are pretty routine these days, but the bridges are not quite standard items you order from a catalogue. The girders, whether of steel or concrete, are custom-build for each bridge, then trucked to the site and hoisted into place with a crane. The designer still has scope for variation and creativity, and it shows out on the highways: some overpasses are prettier than others. Brian Hayes, Infrastructure: A Guide to the Industrial Landscape engineeringdesignautomationroutine
Anasazi dwellings The Anasazi Indians of the southwestern United States were remarkably clever in choosing the sites for their cliff dwellings. They invariably chose locations shaded in the summer by an overhanging ledge of the cliff, but exposed to full sun all winter long. With their backs to the cliff, the dwellings were protected from the winter winds and also took advantage of the thermal mass of the earth to moderate the temperature flux. Lisa Heschong, Thermal Delight in Architecture Eaves and sun building