littlebigdetails A Blog by Floris Dekker littlebigdetails.com Little Big Details is a curated collection of the finer details of design. As Charles & Ray Eames put it: “The details are not the details; they make the product.” This is intended to be a source of inspiration. Created and curated by Floris Dekker. Alumni: Andrew McCarthy. Essential vs. nice to have detailsmicrositeswhimsydesign
Pylons Not all the towers along a transmission line are identical. Look closely at a tower where the line makes a sharp turn and you will likely find it is wider and beefier than other towers along the route. The added strength and weight are needed to resist the unbalanced pull of the conductors, which might overturn an ordinary tower. These special towers are called deviation or angle towers. The transmission-line tower everybody knows is an Erector Set latticework of steel girders and diagonal braces. The techniques for designing and building these towers are the same ones used in constructing steel bridge trusses or crane booms. The individual pieces can be made cheaply from rolled steel and then bolted together on the site. This last point is more important than it might seem: transporting a fully assembled tower 100 feet tall is an awkward and expensive business. Brian Hayes, Infrastructure: A Guide to the Industrial Landscape The Pylon Appreciation Society metalgeometryenergypylons